Mini Decanter Centrifuge For Australia Diamond Drilling Application

Decanter centrifuge is designed to separe fine solids from drilling mud, diamond drilling is one of the applications for decanter centrifuge.

Main Technical Specification Of Diamond Drilling Decanter Centrifuge

  1. Model: GNLW223 decanter centrifuge                           .
  2. Bowl Diameter: 220mm                                                .
  3. Effective Capacity Of Centrifuge: 06GPM
  4. Typical Bowl Speed: 3800 RPM                                 .
  5. Typical G Force :   1777                                             .
  6. Separation Point  :  2-5 micron                               .
  7. Differential Speed  :   35                                 .
  8. Gear Box Torch  :    500 N.M                                    .
  9. Gear Box Ration   :   35:1
  10. Main Drive Motor   :  11 KW   
  11. Recommend Pump:   :3KW
  12. Ex Standard   ExdIIBt4               .

GN Solids supply mini decanter centrifuge for diamond drilling for Australia drilling applications, Please contact GN for questions freely

GN USA Drilling Mud System key features

The drilling mud system processing sewage slurry ability big, the biggest slurry capacity of 250 m3 / h, purification desanding efficiency, separation size d50 = 0.030 ㎜.  Vibrating screen low failure rate, simple operation, easy installation, use and maintenance. Advanced way of linear vibration screening out the ballast materials have very good dehydration effect. Adjustable vibration force of vibrating sieve, sieve surface Angle and mesh size in the various stratum can keep a good screening effect. Vibrating screen, high screening efficiency, and can be adapted to the various drilling rig in different formation pore penetration.  Vibration motor, high power factor, low energy consumption, energy saving effect is remarkable. Vibrating screen operation low noise, which is beneficial to improve the working environment. Resistant to abrasion of centrifugal slurry pump with advanced structure, high degree of generalization, reliable operation and convenient installation and maintenance, etc; Thicker bearing grinding and with heavy bracket to make it suitable for conveying strong abrasion, high concentration of slurry for a long time. 

 GN  USA cuttings dryer  functions within Venezuela, other than centrifuge decanter, all of us also provide shale shaker, dirt solution, centrifugal pump motor, this kind of type of solids manage tools function within Venezuela along with other South usa nations. The actual centrifuges tend to be delivered having a group which could change the actual elevation. Whenever this reached website, the consumer require to create a brand new remain to achieve the centrifuge upon, as well as make use of mounting bolts to repair all of them collectively. Additionally the consumer require to create a brand new lengthy solids release trough as well as use it the actual higher remain, exact same using the liquids electric outlet. 

Design novel liquid level automatic balance device can not only maintain stability of the slurry storage tank liquid level, also can realize mud repeated processing, to improve the quality of purification. Unique recoil device can effectively prevent the slurry storage tank silt sand pulp, to maintain long-term normal operation. cuttings dryer’s working principle: by reverse circulation sand and gravel pump suction at the bottom of the bore of the unclean pulp through the total into the slurry pipe (1) to the mud purification device screen diction, by its vibration screening particle size in 3 separate ㎜ above the slag material. After coarse sieve screening of mud into the mud slurry storage tank (3) of the purification device, by the mud purification device of slag pulp pump (4) from the slot suction slurry, in the pump outlet has certain energy storage mud slurry hose from the hydrocyclone [5] the tangential into pulp inlet, through the hydrocyclone separation, fine particle size of mud by grit mouth out of the bottom of cyclone in fine screen [6]. A drier after fine sieve dehydration screening, fine design material, through the fine screen filter mud again return to the slurry storage tank

Drilling Mud Recycling Tank For Trenchless Drilling

Trenchless drilling is doing to avoid dig on ground but will need mud recycling tank to recycle drilling mud. Why trenchless drilling need drilling mud and mud recycling machine?

  1. To bring cuttings from hole bottom to ground
  2. Keep hole pressure
  3. Cool down drilling rig
  4. Drilling mud is costive, mud recycling machine will help lower cost
  5. Drilling mud is can’t be desposal to environment, mud recycling system will help to avoid mud polusion to environment

Drilling Mud Recycling Tank Configuration

  1. Shale shaker for drilling cuttings separation
  2. Desander for separate sand in dirty drilling mud
  3. Desilter for separate silter in dirty drilling mud
  4. Mud tank for holding mud
  5. Pumps for mud transfer
  6. Mixing hopper for mixing new mud for reuse
  7. Mixing pump for feeding mixing hopper

GN Solids supply trenchless mud recycling tank to all over the word. Please contact GN Solids freely for trenchless mud recycling tank.

mud agitators components

All mud agitators and mud conditioners share the same simple design and rugged components. With minimal replacement parts, they provide years of dependable, economical service. Smaller solids that may bypass the agitators can be removed by Brandt hydrocyclones. Brandt mud conditioners save valuable fluid by drying the hydrocyclone underflow with efficient linear motion.

Gnsolidsamerica.com mud agitator are ideal for“closed-loop” operations or whenever excessive liquid loss from hydrocyclone underflows must be avoided. When liquid loss is not a concern, the hydrocyclone underflow may be directed away from the screens by simply opening the bypass valve. This minimizes liquid pools and reduces undue weight on screens.

The causes of damage of mud agitator are: 1. The drilling fluid density, high viscosity, mixer, low power, overload use 2. Don’t insist on continuous operation, drilling fluid static for a long time after the start, by overload 3. Can’t adhere to timely maintenance moist 4. Installation is unreasonable, no cover or fan operation 5. Fixed condition is bad, screw loosening, or a fixed screw is not complete, large vibration and damage, these can cause damage to the blender. Mud agitator in order to adapt to the need of more comprehensive drilling, it is the trend of future: timing, constant speed, single, such as choosing a variety of functions, easy operation, stable starting torque, rotational speed, low noise, etc. GN solids control company staff to build professional e-commerce website, here, we will show you the best mud mixers, as well as our online services platform to answer your problem. If you want to get it, click here to go directly to the page, I believe your choice, can’t be wrong.

The far east GN drilling waste mangement program

 Drilling operation, especially the environmental impact of drilling waste become workers, service companies and regulators are issues of concern. Early regulations are generally refer to factors such as underground water and the local environment, to limit emissions or hydride in oil content in the content, or place limits on emissions. Used for drilling fluid types also have detailed provisions, the toxicity of the need for evaluation of drilling fluid and drilling waste  mangement  and control. The new regulations to build and cost inevitably have an effect.

At present, the selection of drilling  waste  mangement  or the processing of drilling waste management  and emissions to meet the requirements of the new law is likely to increase. People are paying more attention to the waste generated by quantity, reduce its sources become a key factor in waste disposal. The SPE online library retrieval results show that as early as the early 1990 s began to appear the literature of drilling waste management. It shows that industrial focus on problems and abide by the laws and regulations and increased costs and increased at that time

 

GN drilling  waste  mangement is really a The far east dependent dirt program producer concentrate on drilling dirt recycling where possible program within 3 devissions: Gas and oil Drilling, Horizontally Directional Drilling(HDD)/Coal Seam Methan(CSM) as well as Slurry splitting up. GN offers joined Sydney marketplace within this past year as well as product sales as well as support gets strongger as well as stornger depending on high quality, resonable cost as well as certain support. Make sure you contact  with GN Solids Manage readily