GN Nodig Mud Recycling System

1000HP drilling rig will require solids control equipment for drilling mud recycling and storage. GN just finished one set to Poland end of last month.

Before design a set of solids control system, you need confirm bellowing questions:

1. Mud flow requirement. This need confirm to choose shale shaker and desander desilter
2. If vacuum degasser required
3. How many set of decanter centrifuge require
4. High speed decanter centrifuge or middle speed or both?
5. Mud tank holding capacity needed
6. Mud tank dimention limit and requirement
7. Mud tank compartment required
8. Jobsite layout and jard limit to design mud tank layout
9. Mud suction line size and outlet position to suilt mud pump
10. If need tank roof or not
11. Other special request

GN Solids is one of the leading solids control eqipment suppllier, please contact us freely for inquiry or techinical.

desander, Shale shaker,desilter produced by GN solids control can be used for solids removal projects, whatever the project is, if only you need to remove big solids from the fluids/mud/slurry, these equipments can help. Depends on the different mesh size, the shale shaker can separate different points. In the traditional solids control system, shale shaker can separate 400 microns, desander can dispose sands and some small waste, desilter cone can separate 25 microns and decanter centrifuge is the last cleaning phase which can separate fine solids up to 2 microns.

For non- solids control projects, if you would like to analyse if desander can be used for your projects, you need to answer the questions below:

1 What is the biggest solids size in the slurry/fluids?

2 What is the minimum solids size remained in the desander?

3 What is the solids content by weight?

4.all desander Manual also is GN desander Codes & Standards?

Extra questions will be required according to different application. Welcome to contact GN solids America.

Drilling mud system is well used in drilling industry, but what a drilling mud system do and what’s the applications?

Drilling mud system is working for solids separation from driling mud and control mud density and viscosity for re-use, so it’s named drilling mud recycling system. But why a mud system should do this job?

1. Suitable drilling mud will help keep well pressure
2. Drilling mud will connect with oil&gas directly, suitable mud will help protect oil and gas
3. There normally contains oil and other chenimcals in drilling mud, so mud system will help to recycling and re-use to decrease polution
4. Drilling mud will help bring drilling cuttings out
5. Drilling mud help cool down drill bit
6. According to drilling mud change, people can help know info under ground in well

A Drilling Mud System Contains:

1. Drilling mud recycling machine like shale shaker, desander, desilter and decanter centrifuge.
2. Mud tanks for mud storage and transfer
3. Mixer for mixing new drilling mud for re-use
4. Mud agitator to avoid mud settling down

GN Solids Manage is world top manufacturer for drilling rig mud program for onshore and offshore drilling. GN exported quite a few complete 1000HP rig mud method for offshore drilling for a well-known offshore drilling company.

So that you can cater for distinct buyer calls for, GN offer diverse common proposal program for selection

Higher regular for 1000hp drilling rig mud method for onshore / offshore:

Full with 4 stage solids manage equipment and also the 5 stage separation:

1) Shale shaker 2 sets.

2) Mud cleaner with significant shale shaker, 1 set.

3) Vacuum degasser 1 set

4) Middle speed centrifuge & feed pump,1 set.

5) drilling waste management,1 set.

6) Jet mud mixer two sets

7) Necessary pumps, agitators and mud guns

Economic normal for 1000hp drilling rig mud program:

Comprehensive with 4 stage solids manage equipment as well as the 4 stage separation:

1) Shale shaker two sets

two) 1 set Desander 1 set, Desilter 1 set (without under flow shale shaker)

three) Vacuum degasser 1 set

four) Jet mud mixer 2 sets

five) Necessary pumps, agitators and mud guns

6) Tanks, attachments and electrical control panel for list equipment (for solution)

GN Solids Control also equip drilling waste management method together with drilling rig mud technique for onshore / offshore, for zero discharge. here we  test it of GN drilling waste management in Europe,it’s good,Welcome you contact GN group for inquire,the test Result: http://www.mudcentrifuge.com/post/85199528086/gn-drilling-waste-management-along-with-solids, pls visit here.

being packed and loaded in GN Solids Control System Factory, One set oil drilling mud system was finished production in GN Solids Handle factory positioned in China. This mud strategy is developed for 1000HP oil drilling rig. It will be utilised inside a Poland oil field.

This mud systems completely has 3 sets mud tanks for mud holding and storage. The very first mud tank is utilised as treating and cleaning tank. You’ll find actually two 500 GPM shale shakers, 1 set mud cleaner. The mud cleaner has 2x ten? desander cones and 12×4 desilter cones. two centrifugal pumps are made use of to feed the mud cleaner. A single for desander and one particular distinct for desilter. The second tank is applied as mixing tanks you may learn 2 sets jet mud mixer with centrifugal pumps. The jet mud mixer is applied for mixing new mud for the drilling rig. The third tank is mud storage tank. On all tanks it is possible to find mud agitators for mud mixing. This complete strategy is paint by client? personal logo. As well as the colour is also customized. We’re really versatile in carrying out tiny enterprise we accept customers own colour and logo on all our equipments.

GN Solids Manage has enough encounter in producing solids handle mud systems. That’s our key and core enterprise. Our mud systems have been operating around the globe when our organization established. We also have mud systems for HDD, CBM drilling and compact design and style strategy for bored piling, Gn-Solids-America shaker screens are rather popular as well. Their screens conform to API 13C. They also provide shaker screen for many other famous brand.

GNSolidsamerica provide best Solids Control & Mud cleaner, even offer shaker screen,you can contact them to get more help.