GN Nodig Mud Recycling System

Among all the Chinese Solids Control
suppliers, even commented by its peers in this industry, GN Solids Control has
a good reputation, because since its establishment several years ago, GN has
been determined to provide the oil and gas industry the best quality equipments
and most efficient solutions and to stand an good example for Made in China.

Now, GN Solids Control became the second
to none solids control company and the main reasons are as below:

1. GN always catches up with the newest
technology and GN R&D team always innoviate new designs per end users’
suggestions and apply the designs onto equipment quickly.

2. GN uses the top and reliable material
and parts, like the steel, GN uses the national standard steels from big steel
companies. The bearings and oil sealing, GN use SKF,
NSK, FAG and SOG. Only good material can ensure the good products.

3. GN is serious about after-sale service, like
the free of charge first time commissioning for main equipments, and for after
sale services, like spare parts, GN always has spare parts available in stock
and can do on line diagnose in case of troubles.

When talking about the real performance of
the equipment, the evidences from the clients who use them are more convincible
than those from the manufacturer. There are feedbacks from some of GN clients:

1. Baker Hughes, one of the largest Oil
Service companies in the world, choose GN as its solids control supplier in
China, and ordered 4 sets of complete GN drilling
cuttings waste management systems to use in their Russian sites. And they
are giving good feedbacks and comments. You can see their jobsite working video
here:

2. An Nigerian drilling company, they
visited all China main solids control suppliers before ordering, and finally
chose GN for long term cooperation and use GN’s centrifuges, vertical
cuttings dryers and pumps and etc. They are foreign companies in Nigeria,
they have to strictly obey all the regulations for protecting the environment,
and GN’s equipment and solutions helped them a lot.

3. other clients, like Scomi Oiltools, also
an international company for oil service, and some European companies, and etc.
Same equipments system is also working on Shell’s jobsite, see jobsite video
here.

Related Posts

• GN Fixation Unit for Drilling Waste Management
• Another Drilling Cuttings Vertical Cuttings Dryer Sailing for Russia
• two Package Drilling waste management instrumentation prepared delivery for continent market.
• Waste management decanter centrifuge specification

Because first API certified solids
control manufacturer in Cina, GN Solids Control has furnished to more than 60
international locations and regions with its affordable products, covering all
connected main equipment of solid control and waste management system for oil and gas going.

The main principle of the solid control systems is actual physical separation,
using the physical personas of different media, the solid waste control
equipment separate the maximum amount of solids from the liquid. At this time,
in other industries apart from the oil and gas drilling, such efficient
equipments are also chosen in the end users, to make their function more
efficient and easier.
Actual physical Functions of solids management equipment:
Since the most important solid waste control equipments are correspondingly
shale shaker and decanter centrifuge, many of us talk about only these installment payments on your Now
in many oil and gas going jobsite, the end users decide on more shakers and
centrifuges instead of former hydrocyclones.

– shale shaker. Shale shaker is among the most efficient equipment in solid
waste control process, because it utilizes less energy while isolates the most
solids out of the water by using the different size of the particular solids
and by means of diverse size mesh on the shaker and a couple of vibration power
generators. The disadvantage is that the shaker weren’t able to separate very
fine allergens, and its separation work is draft. GN has several nos screen
shale shaker as well as 4 nos screen shale shaker for option
with unit GNZS703E and GNZS594E

installment payments on your decanter centrifuge is a high speed sequence
machine, mostly horizontal. Within the high speed rotating bowl in addition to
inside bowl there is an impeller. During the rotating, the centrifugal forces
on different stuff are not same, that causes typically the liquid phase
continuously passes out of the bowl while the shades particles are slashed for
the bowl inside wall in addition to pushed out of the centrifuge debris
discharge ports. The decanter centrifuge a gentle and precise, higher priced
than shale shaker, not only the expense of itself, but also the consumption of
energy. But it is ideal solution with regard to separating out the fine and
additional fine particles. GN centrifuge family covers all popular sizes of
decanter centrifuges from 9 inch pan diameter to 22 inches bowl diameter, among
those centrifuges, GNLW363 with 14 inches bowl is the most popular type.

For more information, welcome to contact us unhampered or visit our website.

Related Posts

• Drilling Waste cuttings Decanter Centrifuge
• GN Equips the Solids Control Equipment with Own Fabricated Control Panel
• Shale shaker purpose
• Choose a Suitable Shale Shaker for Your Jobsite

In drilling mud solids control system, the
mud agitator is one type of very important equipment widely used in the active mud
storage tank to make the solids suspension to avoid settlement down to the tank
bottom. As a leading manufacture for solids
control equipment, GN solids control provide the mud agitator from 4 hp to
30 hp, the bearing used are from FAG and the oil seal is from SOG. GN’s mud
agitator is direct connection type for the motor and gear box, which makes the
structure more compact.

How to choose the right model of GN’s Mud
Agitator

By choosing the suitable model of the mud agitator, GN always
needs know how the inner dimension of the mud tank or mud pit is. Thus GN’s
engineering team would propose the right agitator shaft length and the size of
the impeller. If the mud density could be provided, that would much helpful for
GN to suggest the horse power of the motor. Generally, the heavy much may
request a high power.

How to Install the Mud Agitator

GN’s mud agitator always has the mounting
skid on which the gear box and motor are installed. This design makes the mud
agitator unit more stable if it is installed on the mud tank.  GN’s mud agitator unit will be divided into
pieced for easy delivery. Always, the gear box and motor will be as assembling
package for delivery. The shaft and impeller will be disassembled and packed in
other crates. When install the mud agitator on mud tank, the gear box and motor
assembling is lift and put on the tank top where there has already a hole for
agitator shaft insert into inside of the tank. The shaft was straightly and
vertically bolted to connect with the gear box. For the shaft longer than 6”,
the agitator unit is provided with tank bottom stabilizer to fix lower end of
the shaft to prevent vibration during working. GN can provide the agitator with
one and tow impellers as per the tank depth. The location of the impeller on
the shaft is determined as a height from the tank bottom to the impeller. GN recommends
the distance 0.75 times of the impeller diameter. For example, a 20” impeller should
be mounted 15” above the bottom. GN recommends straight impeller blades for tanks
under 5’ deep and canted blades for deeper tanks. If dual impellers are
desired, straight blade should be mounted on the bottom and the canted blade
impeller is installed at a point about two-thirds distance above the tank
bottom.

Any request
on GN’s mud agitator, welcome contact with us for a
quote and more information.

Related Posts

• JBQ Drilling mud agitator
• Design of Mud Agitator
• GN Mud Agitator and GN Mud Guns

Hebei GN Solids Control Co., Ltd is the top
manufacturer of solids control equipment and leading manufacturer of drilling
waste management equipment in China, being the first API certified in China and
the first developed vertical
cutting dryer in China. Because of its leading role in solids control and
waste management technology, Hebei GN Solids Control Co., Ltd has exported to
over 60 countries and occupied the largest portion in the international market,
thus achieving a famous brand GN Solids Control.
Certainly, Africa especially Nigeria is a huge market for GN, and now around
100 sets decanter centrifuge are operating in Africa for solids control.
Recently, our sales team are now in Nigeria doing commission service for 3 sets
drilling
waste management equipment on the drilling site.

GN main product line of drilling waste
management includes high G shaker, vertical cutting dryer and decanter
centrifuge. GN high G
shaker can reach to max 8.0 G force because the screen bed is made of
stainless steel and the whole deck is heat treated. GN vertical cutting dryer
can reach to a 750 G force at a speed of 1200RPM so as to dry the oil based
drilling cutting with a oil content at around 5%. GN decanter
centrifuge is to treat the liquids discharge from high G shaker or the
vertical cutting dryer to make more clean fluids return back to active system. Beside
singe drilling waste management equipment, GN Solids Control also supplies
complete drilling waste management system with the combination of vertical
cutting dryer and decanter centrifuge on a skid mounted with little mud tank. GN provides 2
standard model of drilling waste management system for customers’ option, and
also customized drilling waste management systems are available in GN.

In the recent days, 4 sets of shale shaker
together with a large batch of shaker screens are ready for delivery to UAE. It
was a repeated order for one of GN UAE client with which to replace the old
shale shakers in the existing solids control system. Each year, Hebei GN Solids
Control Co., Ltd manufactures around 250 sets shale shaker because of its
popularity in the international market with high quality and competitive price.
This time, the customer also ordered a large batch of screens.

GN shale shaker is fixed with 2, 3 or 4
panels of screens with different designed treating capacities. Frankly
speaking, the most popular model is 3-panel. GN shale shakers owns the below
advantages.

1.      
Screen bed is made of stainless
steel to extend its service life and improve its performance.

2.      
Shaker motors come from Italy
Oli or Martin; electric control components come from SIEMENS or Schneider.

3.      
Whole deck is heat-treated to
ensure it works stably and safely at high G force up to 7.5 G.

4.      
The screens are locked by
wedges so to speed up the screen-changing process.

5.      
Rubber sealing is adopted between
screen and bed to avoid fluids overflowing and leakage.

6.      
Three options for feeding are
available with weir feeder, box feeder and hopper feeder.

Besides manufacturing screens for GN shale
shaker, GN Solids Control also manufactures and supplies replaceable screen
with famous brand shale shaker such as Derrick, MI-Swaco, NOV Brandt and so on.
GN screens are of high quality because the raw material comes from the same
supplier to Derrick screens, and the glues used to stick the screen are
imported from Canada. High Quality Product has always been GN pursue and
promise to our customers.