GN Nodig Mud Recycling System

At the Dalam negri Oil show this year, GN Solids
Control brought 1 unit high G drive drilling mud shale shaker there. This is
the second returning to GN showing at Dalam negeri oil show. Last efforts the
year of 2013, GN showed there 1 device shale shaker with several panels screen.
This year, typically the shale shaker shown is often a 4-panels shaker screen
model which will received much attention on the visitors at the show.

Guidelines the features of the 4-panel machine drying shaker GNZS594E-HB:
1 . GNZS594E -HB is a linear
action shale shaker with 4-panels screen that are fastened by simply 8
pieces wedge obstructs and easy for screen substitution.
2 . Available screen region 2 . 7 square yards, each screen dimension
585x1165mm
3. Installed screen can be both steel frame sort for cost saving in addition to
composite material for extended working life.
4. A couple of sets of vibrator engine help to supply sufficient H force for
better performance.
your five. Patented sealing technology involving screens and frame successfully
prevents the fluids seapage.

By choosing different types of the spread box, this shaker could possibly be
used for different jobs. The original back type feeder can be used for oil
drilling major solids control. If this product is equipped with a hopper sort
feeder, this shaker may be used as a high H force drying shaker with all the G
force up main and adjustable. The drying out shaker is main tools for waste
cuttings management system.

In GN’s generation line for
modular waste material management equipment package, this particular shaker
is assembled which has a beneath located catching tank. This drying shaker
package deal could be located on site comparative freely as it is compact
composition and small foot printing. The catching tank is a transferring
centrifugal pump which can transfer the segregated drilling fluids for further
handling. This drying shaker is especially for WBM waste cuttings drying
process and GN’s drying shaker has already been utilised in PERTAMINA.

In the Indonesia Oil show this season, GN Solids
Control introduced one unit high Gary the gadget guy force drilling
mud shale shaker there. This is the 2nd time for GN showing in Indonesia
oil show. Continue time in the year of 2013, GN showed there a single unit
shale shaker along with 3 panels screen. This current year, the shale shaker
revealed is a 4-panels screen type which received much awareness of the
visitors at the display.
Below are the features of the 4-panel drying shaker GNZS594E-HB:
one GNZS594E -HB is a thready motion shale shaker along with 4-panels screen
that are mounted by 8 pieces pitching wedge blocks and easy for screen replacement.
2 . Available shale shaker
screen area 2 . 7 rectangular meters, each screen shape 585x1165mm
3. Installed screen could be both steel body type for cost conserving and
composite material with regard to longer working life.
5. Two sets of spielzeug motor help to supply adequate G force for higher
efficiency.
5. Patented sealing technological know-how between screens and structure
effectively prevents the water leakage.

By choosing different types of the actual butter box, this shaker could be used
for different job opportunities. The traditional back type feeder is used for
oil going primary solids control. Issue unit is equipped with a hopper type
feeder, this shaker could be used as a excessive G force drying shaker with the
G force upward 8 and adjustable. The actual drying shaker is primary equipment
for waste cuttings management system.
In GN’s production line for drilling
waste management equipment bundle, this shaker is built with a beneath
located hooking tank. This drying shaker package could be located on website
relative freely as it is stream-lined structure and small foot or so print. The
catching tank is with a transferring centrifugal pump which can transfer the
actual separated drilling fluids for even more processing. This drying shaker
is mainly for WBM spend cuttings drying process along with GN’s drying shaker
was already used in PERTAMINA.

GN Solids America LLC is the  major exporter from China and conduct
business relationship over 60 plus countries around the world and keep gaining.  We manufacture Mud Solids Control  System & Drilling
Waste Management. GN have the full line of machinery for Solids Control
Solution of your oil gas drilling, CBM drilling, HDD, and water well drilling
as well as the construction drilling mud treatment.  

·        
GN
is the First API certified solids
control equipment manufacturer in China.

·        
GN
Facilities for  manufacture Solids
Control System in area is over 65,000 ㎡(700,000SF) which is located outskirt of  Beijing.

·        
GN 
Owns a its facility for making shaker screens.

·        
GN 
Owns over 10 patents for solids control and drilling waste management
equipment.

·        
GN
products is certified by DNV CE for Europe and TP TC for
Russia.

·        
GN management
system for manufacturing comply with the HSE system ISO 14001 and ISO 28001 to
ensure you with safest products.

GN Solids
America LLC manufacture oil drilling equipment including shale shakers and its wear
and tear  parts. Shale shakers is the filter machinery
that remove drill cuttings from the drilling mud that is used for digging holes
into the earth. Filtering the solids in drilling fluid is an important
component of the cost of drilling, so research and development into shaker
functioning is ongoing.

GN
Solids America’s shale shaker design – Shale shakers consist of large, flat
wire mesh screens for  filtering or
sieves of various mesh sizes that shake or vibrate the drill cuttings.  The commonly filter across and off of the

shale shaker
screens

as the drilling fluid (mud) flows through them and back into the
drilling fluid system. This separates the solid drill cuttings from the fluid
so that it can be re-circulated back down the well bore for keep the drill bit
functioning.

Recently GN solids control shipped some customized
designed drilling cuttings solidification unit to South africa, this is not our
first product solidification unit, pls what is previous shipment news after
this:
The
principle components of stabilization unit is usually including: drilling waste
variety hopper, cement storage container, Absorber storage box, shear mixer,
liquid feeding, mixer discharge, and skid, you can make customized treating
ability solidification unit for
your unique requirement. Our standard type GNGH-10A stabilization unit together
with 10m3/h treating capacity, the system for the Africa client is definitely
GNGH-15A with 15m3/h managing capacity.
The main parameters regarding GNGH-15A solidification unit:
（1） shear
mixer power: 45kw
（2）
drilling waste storage volume: 5m3
（3） screw
conveyor power: seven. 5kw
（4）
cement storage level: 1000L
（5）
cement screw conveyor power: 1 . 1kw
（6）
absorber storage volume: 1000L
（7）
absorber screw conveyor powder: 1 ) 1kw
（8）
required crane features: 0. 5tons
（9） total
electric power consumption: 54. 7 kw
（10） All
the screw conveyor is with VFD control, typically the flow rate is variable
（11） The
mixer tank amount: 4000L

To get more info connected with GN drilling cuttings renforcement unit specs,
pls speak to GN solids
control product sales.
Why choose GN renforcement unit?
(1) Applicable for equally oil based drilling cuttings as well as water based
drilling cuttings
(2) It produced a enviroment safe and dry materials which is acceptable for
landfill or land farming grasp.
(3) It produced a relatively dried out material with steadily construction
which is cheaper for transfer or disposal, it is an economical way for drilling
cuttings grasp if it is laws allowed in this country.
(4) Except for securing unit, GN also provide drilling
waste management system with regard to both water based mud and oil based
mud, we could actually provide the turnkey solution to get drilling waste
disposal.

GN solids America located in 6710 winderfern road, Houston, TX77040, here you
are at visit our warehouse inside Houston and consult with our own sales team.

GN Solids Control
provided one set of mud system for The european union GN
Solids Command manufactures various mud these recycling systems and most of
these mud systems are widely used within over 60 countries. As increasing
numbers of countries pay attention to the environment safety, GN mud
recycling system are getting more and more popular.

Lately, GN Solids Control only provided one set of mud system that using in h2o
well drilling for The european union. GN Solids Control mud systems
successfully won this kind of project due to the large productive projects that
we did ahead of. And GN Solids control also has many certifications that prove
GN has been attempting to be the No . 1 solids control manufacturer in the
world. Vouchers such as API, DNV, ISO are available since the establishment.

This kind of GN water well mud system is purchased by on the list of leading
well drilling firms in Europe. They will recycling the drilling mud and
recycling the water. This system is like the bellowing equipments:

1 .GN
Double Deck Shaker

Which has a compact structure, GN dual deck shaker is mainly useful for two
phase separation. The top shaker is equipped with shaker displays have larger
opening, whilst the bottom shaker is equipped with displays have small opening.
Going fluids will be separated with the upper deck shaker beforehand, then it
can be further split up by the bottom shaker.

2 . GN Decanter
Centrifuge

GN centrifuge GNLW363 is traditionally used to separate out pretty good solids
from 2 microns to 5 microns. The spinning bowl diameter is 14inch, with a high
rotating increase to 3200 rpm, often the G force can get to to 2062G.

3. GN Screw Pump

GN good displacement pumps, also referred to as screw pumps, they are mainly
utilized to feed into decanter centrifuge without agitating the drilling mud
too much.

4. GN mudTank

Shaker, centrifuge along with screw pump are attached with one mud tank. On
this company design, GN drinking water well mud system can be utilized in many
different worksites.

Related Posts

• 200GPM Mud Recycling System For Sale In Australia
• Four sets 1000GPM HDD mud Systems Working In CPP Worksite
• mud Recycling System to The european union with CE Certificate
• Plastic Mixing Unit Used in Solids Control System