GN Nodig Mud Recycling System

Vacuum Degasser
is mostly used in essential oil & gas drilling rigs. It is used to remove
the fuel in the drilling mud to hold the property, keep the density, the law of
gravity and viscosity of the drilling mud. This unit is generally installed
after shakers, can function efficiently to remove gas through gas-cut mud, to
prevent possible blowouts. This unit is essential working as one of security
equipment in drilling rigsite.
Recently, we have one customer from Africa, purchasing 1 set vacuum degasser
for first time project. The client is nearby famous drilling contractor as well
as work together with Shell, Mobil, Chevron, Halliburton etc .
The actual vacuum degasser we offer for them, with below technical specs:

· Model: GNZCQ360A
· Main size: 920mm
· Capacity: ≤360 m3/h (1584GPM)
· Vacuum Degre: -0. 02~-0. 04 Mpa
· Handling Efficiency: ≥95%
· Main Electric motor Power: 37Kw (50HP)
· Pump Motor Power: 7. 5Kw (10 HP)
· Rotation Pace: 860RPM
· EX Standard: ExdIIBt4
· Suction line size: six inch
· Outlet line dimension: 8 inch
· Weight: 1870kg
· Dimension: 2100×1605×1729mm

The produce is as per GB/T11645-89 Nationwide Standard. After all assembly
complete, test with water. Almost all connections and welding factors no
leakage, vacuum level reach to above 400mmHg. Within 2hours, bearing temporary.
Keep below 60°C. Absolutely no abnormal noise or coup.
Except for vacuum degasser, all of us export large quantity of decanter
centrifuge, vertical cuttings dryer, mud agitator, centrifugal penis pumps,
shale shakers and shaker screens.
1) GN high quality decanter centrifuge for Africa marketplace
GNLW363CG or GNLW363CG-VFD is among the most popular decanter centrifuge with
regard to solids control drilling marketplace. The 14inch decanter centrifuge
can be used for barite recuperation, mud weight cutting as well as LGS
separation. This is the the majority of flexible centrifuge model, that similar
to US brand centrifuges.

2) GN premium up and down cuttings dryer for Africa drilling
waste management project
GNCD930 vertical cuttings dryer is actually tested in rigsite for nearly 3
years. In the past years, all of us keep improving the quality as well as
design of the dryer. For the time being, the quality and performance can
contend with US brand vertical cuttings dryer. Many drilling service provider
shift from US brand name dryer to GN
Solids Control brand, to get higher cost-effective product.
3) Great quantity of centrifugal pumps and shaker screens also exported in
order to Nigeria, Egypt, Libya, Sudan, Gabon, Ghana etc .

-web۴���

In 2015, GN Solids Control sold 4 sets of packaged drilling
waste management system to Baker Hughes.

 

As we all know, Baker Huges, the 3^rd biggest
oilfield service company on the world, represents the high standard and high
requirements with the equipment or products. Behind Baker Hughes chose GN
Solids Control what does that mean?

Apparently, it means they recognize GN Solids Control, recognize
the good quality of products provided by GN Solids Control.

 

The 4 sets of packaged system mainly include the Vertical
Cuttings Dyers, Decanter Centrifuges, Mud Pumps and Mud tanks, which are mainly
used for treating the drilling waste. All the equipment installed on the system
are manufactured by GN Solid Control. The system is mainly used for treating
the drilling waste, reducing the hazard to environment and cost expense. After
the systems arrived at the well site, GN Solids Control specially arranged
experienced service engineers to go to the site and gave the training to
customer and debugging the systems.

According the feedback from Baker Hughes, the 4 sets of
systems performed very well and so a high evaluation was given to GN Solids Control.
They said In the future they will continue to choose to cooperate with GN
Solids Control if have relevant requirements.

In the past
years more and more middle and high-end clients have been choosing to cooperate
with GN Solids Control after practical factory visit & communication. The
reasons are because that they have trust on the product quality and product
performance manufactured by GN Solids Control.

Let “GN Solids
Control” become a respectable and world-famous brand in drilling fields is the
vision of each GN people and we will keep providing the best products &
service to each client and let the products create much more value for clients.

Finally, if you want to learn more about GN Solids Control,
welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com  

Email：usa@gnsolidscontrol.com

GN is a top
manufacture of solids control equipment in the world. It could manufacture
various solids control equipment and packaged mud system.

In this article,
we will give a brief introduction about the packaged mud system.

Usually, 1
complete set of mud system should include the following equipment, such as the
Shale Shaker, Desilter, Desander, Centrifuge, Centrifuge Pumps, Agitators, Mud
Guns, Mud tanks and some other necessary components.

For the mud
systems that manufactured by GN, they are widely not only used in the oil &
gas drilling industry, but HDD industry, coal bed methane drilling, water well
drilling, geothermal well drilling, mining, piling works, tunnel construction,
dredging construction. Sometimes they are also used for treating the industrial
wastewater and executing the solid-liquid separation.

As the mud
system are widely used in different industries and different industries have
different requirements, so there are always little or big differences between
different requirement that used in different industries, such as,

1.Usually the
packaged mud system used in the oil & gas drilling industry is very big,
there are many different solids control equipment installed like shale shakers,
mud cleaners, vacuum degasser, centrifugal pumps, jet mud mixer, agitators, mud
guns. There are many mud tanks for different functions, some tanks will be used
as storage tanks, some tanks will be used as mixing tanks, some tanks will
service for the solids control equipment.

2. The packaged
mud system is small, such as used in the HDD industry and CBM drilling
industry. The system structure will be compact and easily moved and the tank
quantity could be limited and tank volume could be small.

3. GN could
manufacture the customized mud system according to the customer requirements,
such as the specific onsite situation, the condition of drilling fluids, the
desired treatment effect of drilling fluids.

Finally, if you
want to learn more about GN Solids Control, welcome to visit GN’s website
and contact us.

Web：http://www.gnsolidsamerica.com  

Email：usa@gnsolidscontrol.com

In this article,
we will mainly introduce the Submersible Slurry Pump manufactured by GN Solids
Control.                                  

As what showed in
below picture, GN Solids Control manufactures and provides the Submersible
Slurry Pump from 4Kw to 45Kw and the Pump Flow is from 30m³/h to 270m³/h,
basically which could meet the requirements of most situations in drilling
field.

1. The Functions
of GN YZ series Submersible Slurry Pump;

In drilling field
the Submersible Slurry Pump is mostly used for feeding the Decanter Centrifuge
and feeding the mud to Shale Shaker from mud pit, sometimes it is also used for
feeding the Desander & Desilter.

2. The Features and
Advantages of GN YZ series Submersible Slurry Pump

1). The
cantilevered structure design, single-stage and single-suction pump;

2). Semi-open
impeller, there is the agitating vane designed located in the pump inlet with
the impeller;

3). Enough
stiffness with the pump shaft, there is no bearings and shaft seals between the
pump body and pump shaft that under the supporting seat, which ensure the pump
is available for transferring the fluid with high concentration solid particles
and there is no need to worry the bearings and shaft seals are damaged by the
solid particles in the drilling fluids. And the pump is maintenance-free and
high temperature resistant;

4). The standard
submersible length of the pump is 1.3 meters, customized length is also available;

5). The pump body
is made of wear resistant alloy and ensure the pump has a longer servicing
life;

6). Motor-driven,
a vertical motor is installed on its supporting seat and connected with the
pump by coupling;

7). There are
different Explosion Standards with the motors & electrical control panel,
such as EXdⅡBt4, IECEX, ATEX
that could meet different customer options;

Finally, if you
want to learn more about GN’s Submersible Slurry Pump, welcome to visit GN’s website
and contact us. http://www.gnsolids.com/

One
year would seem very short if you also have something to do and put in place
your days full. It is very just like yesterday when GN attended CIPPE 2015 via
Beijing, it comes the new yr and the new CIPPE Acrylic Show, CIPPE 2016.

Exactly what did GN show intended for CIPPE 2015?
1 . At the start of Year 2015, GN developed a compact drilling cuttings waste
materials management system, a combination of GNCD930C vertical cuttings dryer
along with GNLW363CG-VFD
decanter centrifuge, between your two equipment is a tank for receiving the
drilling water from the vertical cuttings dryer and for feeding the centrifuge.
It is a compact design, also suitable for land transportation without having
taking down the centrifuge along with V-G dryer.

2 . GN whole family of decanter centrifuges. For the most popular model
GNLW363CG-VFD you could check on the
waste management system skid, different centrifuges, GNLW223 of in search
of inch bowl, GNLW452 regarding 18 inch bowl however middle speed, GNLW553 of
twenty-two inch bowl.
3. Principal equipment for solids control systems, like shale shaker, mud cleaner and and
so forth

During CIPPE 2015, many purchasers and potential clients visited GN Solids
Control’s booth along with checked GN’s products, a few of them visited GN’s
factory having seen GN’s booth and they gifted good comments on GN’s producing
capability.What GN will show in CIPPE 2016?

Looking back to the past yr, GN has accomplished various achievements:
1 . all principal equipments was improved and also updated models are within
design, coming soon for CIPPE 2016.
2 . new machines and systems are well analyzed to be useful on jobsites, will
be introduced to clients inside near future.
3. GN’s completely new factory will be put into use in addition to new
workshops are below construction.

What to know more specifics? Come to us at address listed below:
Address: New China Intercontinental Exhibition Center, Beijing; Number 88,
Yuxiang Road, Tianzhu, Shunyi District, Beijing
Occasion Time: March 29-31, 2016
GN Booth No .: LOUNGE E2 -E2200, booth place 272m2.
Booth Location: http://public.cippe.com.cn/static/hall/2016bj/hall_e2.jpg
Appointment Email: sales@gnsolidscontrol. com
GN Factory Location: 40KM to the Exhibition Center (40 Minutes Drive)