GN Nodig Mud Recycling System

Russian federation is a very important market connected with GN. GN owns a superb marketing share in The ussr market. With the establishment involving GN Solids Russia, advantages and more cooperation between GN group and Russia oilfield waste management companies.

Just lately, a complete drilling waste management system has been dispatchedfor a new Russia client. The system has been put in a 40ft container for fast portable and also for keep increased temperatures the cold weather of Russian federation. It is not the first time for GN Solids Control company provided containerized system to Russian federation market. The system comes with following equipment:

1) Containerized drilling cuttings vertical dryer system consist of one set of GNCD930 up and down cuttings dryer, catch tank, flushing pump and mud transfer pump.
2) Cuttings assortment box for storage associated with drilling cuttings from the top to bottom cuttings dryer.
3) Feeding twist conveyor for transfer drilling cuttings from the oil drilling rig and sent to top to bottom cuttings dryer.
4) Drilling cuttings transfer pump for exchange drilling cuttings with more wetness.
5) Variable speed decanter centrifuge with feed pump intended for polishing the drilling mud recovered from the cuttings dryer.

This module drilling waste  management components is easy to get transportation. And it is flexible for your operators to lay out inside the drilling rig site many different shape of the site.

You can speak to GN Solids Control Russian federation office to learn more about this low heat drilling waste management system.

Advantage of GN Drilling waste management system:
1) One end solutions from the same supplier: GN Solids Control Tiongkok.
2) High Quality products: the 1st API certified waste management equipment from China.
3) Reliable expert services, GN not only supply devices, but also GN provide the client training services and guarantee for 14 months immediately after shipment.
4) Cost effective treatments. Worldwide market share allows GN Solids Control to provide large volume of equipment, and helps you to save cost for making each sole equipment and in a result to help giving cost effective solutions to the particular clients.

Drilling mud serve as lubricant that keep the drilling bit operate smooth.  The consequence of drill bit overworked by temperature heading up will lead to hard work of engine and transmission that lead to breakdown and halt the whole operation.  It is a very costly operation halt that leads cost of extra ten thousand of dollars and more. Plus, the drilling fluid is also a very costly lubricant and to keep the drilling cost under control, solids control machinery is need for filter the debris that contain in the drilling mud for many times of cycle of use the drilling mud.  The 5 filtration machineries that will completely perform filter the solids from the drilling mud are shale shaker, vacuum degasser, Mud Gas Separator, desander, desilter and decanter centrifuge.

The filter step goes in below:

Shale shaker

The drilling mud feed enter the feeding box of shale shaker.  The mud contains various size of the solids return to the ground surface and shale shaker is filtering the biggest solid by use high G force of shaking.  The box of shale shaker contain panels of mesh screen that is different number of mesh depend on solids contents analyze by drilling mud engineer

Vacuum degasser

. The muds that return to ground surface not only contain solids but also gas from the earth core.  This gas that change density of drilling mud leads result change the viscosity of drilling mud. Vacuum degasser removes the gas in the drilling mud to keep the mud in balance and continue the future solids filter process.

Desander

The drilling fluids now that contain medium size solids enter the liquid feeding pump and enter the desander, which contain large hydrocyclone(s).  The solids diameter above 40-60um will be filtered and bottom of desander is pair with shale shaker contain finer mesh compare with first shale shaker to complete the filtering.  T

Desilter

This machinery’s function of work is just as same like desander in last step before. It contains multiple smaller hydrocyclones that can remove solids that measure diameter above 15-40um.  It is also pair with shale shaker like desander and completes this step of filtering.

Decanter Centrifuge

The drilling fluid feed through centrifugal pump that feed into decanter centrifuge that rotate in High speed of G force.  The rotating bowl will separate solids from the mud and exit in one for solids and other one is for filtered mud.  The drilling mud now will feed back to the rig for next cycle of usage.

GN Solids Control is The far east leading brand of solids control equipment supplier with basic in Beijing, Houston and also Russia. And each month all of us export lots of mud devices for solids control as well as drilling waste management or even mud system to in a different country client and domestic consumers. Recently our company is fully entertained because of lots of project tools are ready for dispatch.

1) Several centrifugal pump for Nigeria client
Nigeria have a lot of oil drilling rigs in addition to oil blocks. Oil sources is rich there and have lots of clients coming from Nigeria who bought decanter centrifuge, drilling waste management straight cuttings dryer, solids control shale shaker, replacement shaker screen etc . from each of our company—GN Solids Control. Just lately, we got some small get from Nigeria who wants to change their old centrifugal sends. And we sell some models of good pump and mud agitator to them.

2) several sets of mud agitator for Egypt clients
The consumer bought this agitator is actually GN old client who have already bought 2 models 500gpm mud cleaning system for their HDD drilling. These are really happy about the mud system high quality and the dependable working performance. The 500gpm mud system is equipped with some panel shale shaker in addition to 4 panel mud cleaner. The shaker screen is actually composite material shaker screen, replacement for Swaco Mongoose shaker screen, with much better performing performance, longer lifetime and fewer maintenance. We also have additional treating capacity mud system for option. Like 200gpm mud system, 800gpm mud system and 1000gpm mud system

3) 2 models shale shaker for UAE client
Good maintenance can help you lots of cost, than shopping for new products. We give train to be able to client and let them to utilize GN equipment to greatest. And recently, we have 1 client wanting to replace the previous shakers for about 3 years. Which is really good. The shale shaker is to update the mud system the client already have over 2 years. The client buy two sets new shale shaker to update their older mud cleaning system and this is usually relative lower cost to continuing the new project. Because of the lower market, many clients want to take budget, save cost is to do more project. We highly recommend client to renew the mud system with new tools, new shaker, new centrifugal pump, new mud cleaner and new agitator. Commonly, the mud tanks last longer time if the regular maintenance is doing each time soon after use.

Composite stuff shaker screen is a kind of shale shaker screen with material material as basic shape, and use a special form of plasticmaterial to fulfill the structure. According to different API size of nylon uppers size, 2 lays or maybe 3layers different opening cord mesh cloth pressed within the metal and special materials rubber frame.
All the typical model steel frame monitors can be change to composite stuff, like replacement composite displays for Swaco Mongoose shale shaker, for Brandt Ruler Cobra shale shaker, regarding Scomi High G shale shaker, and all series GN brand shale shaker (like GNZS752 shale shaker, GNZS703 shale shaker, GNZS706 shale shaker, GNZS594 shale shaker and GN brand substantial G shaker).
Features of upvc composite material shale shaker:
1) Composite material replacement screen is by using longer life time compared with exactly the same model steel frame substitution screen for the shale shaker.
2) Composite material is lighting in weight compared with the identical model steel frame screen. It is better for the shale shaker.

3) Composite material replacement screen is more suitable for automatical control line. Means high productivity and better quality control. An additional size, it means more cost effective upon price and quality.
Being a worldwide famous brand of mud solids control and drilling waste management equipment producers, GN Solids Control is experienced manufacturer on high quality substitute shaker screens. Besides providing replacement screens for GN own brand shale shaker, GN Solids Control offer high quality replacement screens regarding other brand.
1) GN create and offer high quality replacement upvc composite and steel material projection screens for Swaco Mongoose shale shaker, for Brandt California king Cobra shale shaker, to get Fluids System shale shaker, and for other famous brand shale shaker models.
2) GN tends to make high quality and good value replacement shale shaker screen for Derrick shale shakers.
3) GN also make tailored size replacement screen with regard to other brand shale shaker models. For the clients GN does not made before, the actual clients send a sample for you to GN for customize.
Additionally GN can make customized bundle and color for the alternative screens and other equipment such as shear pump, decanter centrifuge, mud agitator ,mud cleaner and mud mixing system . Like with the clients’ company name and Logo around the screens.

As a top manufacture of Solids Control Equipment, GN Solids
Control has been constantly expanding its business & influence in global
market.

As 1 of the core products of GN Solids Control, the Decanter
Centrifuge is one of the most popular products for global customers. As we all
know, the decanter centrifuge is usually for separating the very fine solids
particles from slurry or mud at high speed, which is widely used in the
drilling field, industrial application, etc. But duo to its complexity and high
requirement for the manufacture process, especially for the high speed decanter
centrifuge, to some extent it belongs to a high-tech product and was under
control by companies from America, Switzerland, etc.

 

Since GN Solids Control was established in 2007, GN Solids
Control has focused on researching & manufacturing the high-speed decanter
centrifuge. By through the constant research and improvement, because of its
high quality and competitive price, the high-speed Decanter Centrifuge manufactured
by GN Solids Control got approved by more and more global customers.

 

In March 2015, GN Solids Control developed the strategic
cooperation with 1 of the customers from Algeria, who purchase more than 30
units of decanter centrifuge at one time. Here below are the pictures,

A few days ago, the feedback was gotten from this customer
and they gave a high praise with the centrifuge performance. According to their
description, all these centrifuges are under operation now in different
districts and each work very well. They thought the products of GN Solids
Control are very good and worthy to be believed.

 

It is gratifying when the good feedback was received from
customer, as creating value by using our products is just our goal.

 

Finally, if you want to learn more about the mud system
manufactured by GN Solids Control, welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com  

Email：usa@gnsolidscontrol.com