To Meet with GN Team, pls Visit us in CIPPE & OTC

CIPPE
GN Booth: E2218 (Hall E2)
Schedule: March 20-22, 2017
Location: New China International Exhibition Center, Beijing (No.88,Yuxiang Road, Tianzhu, Shunyi District, Beijing)
This location is very close to Beijing airport, also GN factory. Welcome to visit GN yard in this time, or after the exhibition.
OTC 2017
No.1 Booth.: NRG  Center 1369-6
No.2 Booth: Arena 8834
1-4 May 2017
NRG Park Houston Texas
What you can find?
1. New Products
FHD decanter centrifuge, full hydraulic is an absent product for quite a long time, as there is no such products in China can be equal to the US / EU products. And lots of clients feedback to us that the hydraulic system from China is not so good. So for FHD centrifuge, the first thing you need to find is hydraulic gearbox.
Though this is not the only option, as some clients are using hydaulic motor, without gearbox running the centrifuge, whist the site is different, the motor they do not find from China either.
So as we did to the shale shaker, find a good shaker motor; we choose to source the same hydraulic gearbox as Rottadiff, we set a same starting point as US / EU products.
2. Big Bowl
Lots of suppliers are considering all the bowl bigger than 14in as big bowl centrifuge, this time we bring some real challanged products.
30in bowl, with ratio upto 4.2, which is our model GNLW764.
Lots of other improvment, too. Welcome to visit us in our booth in either exhibition.

CIPPE 2017, GN with NEW & BETTER Products

As a leader of solids control equipment manufacturers in China, GN keep investing on new products, and as keep providing good quality products, built our international brand name. In the past 2016, GN have made some quite new products which we did not manufacture before: the centrifugal degasser, and the vacuum transfer pump.
Couple weeks ago, GN finished the fabrication of centrifugal type degasser, this enriched GN’s production line. This centrifugal degasser is designed and manufactured after researching many types of degassers home and abroad. It could be used in all kinds of drilling fluids recycling system to remove the gas in the gas cut-in drilling fluids for recovering the mud property, stabilizing mud viscosity and reducing drilling cost.
After a few project, keep buying the vacuum transfer pump, we finally decided to do some research and development on our own vacuum transfering. With our partners help, we finish and test it on site with good performance.
What we keep improving
Shale Shaker
One of the weakeness of Chinese shaker is we do not have a small sump underneath to make the fluids more flexible, to be able to flow to sides of the shakers, which also supposed to make things easier when design the mud tanks with mud ditch to easier balance mud flow. Now here it comes, we will show this type shakers in this exhibition, more details pls chase with our sales team.
Decanter centrifuge is our main products, and keep improving, each and every year, it is also a highlight to our competitors even.
If you are interested in more infomration, keep tune.

Shaker Screens Updates from GN Solids America

For Sale
To keep refreshing our US stock shaker screens, we currently have a lot of shaker screens for sale from GN Solids America, free sea freight charge, to anywhere.


The screens just arrive US ware house from 1month to 3month. We prepared for another project, but it is postponed, and we will not wait for waking her up. Pls kindly send us email to find more info.

More Composite Material Screens
If you have kept tune on GN updates, you must have known that GN have already made a lot of composite material screens, for pretensioned frame type, or soon for the Derrick 500series, Derrick 2000 series.
This time, for a project, one client purchased a 40ft container shaker screens.

About API
If you are familiar with shakers, or shaker screens, API must be one of your concern. All GN screens are manufactured according the practice requirement of API RP 13C, and on the progress, we will have the paper from API soon.

Oil and Water Sludges Treatment Solution

Sludges that contain oil and water are generated via a sort of movements and procedures on board ships, including sedimentation in tanks, tank dewatering techniques, and leaks or cleaning cycles in backflush filters and separators for treating fuel oil and lube oil. The pattern for combusting excessive density gas oils of bigger viscosity, as good as the use of residues as a fuel for medium-velocity diesel engines, also increases the production of sludge from both fuel oil and lube oil.
Emergence of sludges containing oil and water
The construct up of those oil and water-containing sludges represents a enormous disposal concern. Options which have frequently been employed to maintain them comprise incinerating the sludge on board, or taking away it on land. Nevertheless, incineration is an steeply-priced process in view that the sludge has to be dewatered by way of evaporators and then mixed with priceless diesel oil to generate a combustible fuel. Disposal on land can be related to giant expenses, as the sludge has to be transported to a waste disposal website online, which in turn needs to be paid for.

Waste Treatment System for Beijing Project

This is a quite popular design, with a scalping shaker, and a decanter centrifuge for the real separation. More and more clients comes to us for this sort of set up, not only we have the best decanter centrifuge, also the design is quite applicable for many didferent purpose.
Tank cleaning, tunneling sludge treatment, pipe jacking slurry recycling etc.
The basic componets including below:
1)    High G Drying shale shakers
2)    Chemical Dosing System
3)   Decanter Centrifuge
4)    Skid Mounted Mud Tank
5)    Feeding Pumps and transfer pumps.
 
The principle is simple, with old logic, separate them step by step, scapling shaker is  high Dryer shaker is with G force up to 8.0 G, and the 4 panel shaker screens with composite frame increase the conductance and performance.
Then the high speed GN popular decanter centrifuge. GN decanter centrifuge and feed pump is VFD drive which is capable to adjust bowl speed, differential speed, and pump feeding capacity. This allows the operators to select the best parameters for the treatment of different density of drilling fluids.
 
This system is designe for easier transportation, 40ft length, height in the road limit. equipment easy to be disassembled if needed. A step lower design keep this trouble less than you expected.