Dewatering System GNXT7015 is custom made system base on user’s operation need and design toward the need.  It is the stand alone Dewatering System.  。Dewatering System’s treating capacity can reach to 120m3/h. Discharge volume minimum 100 m3/h.  The System mainly operate by shale shaker system GNXT7015-01, Main Material Collect Hopper GNXT7015-02 and Mining Shaker Tank System GNXT7015-03， GNXT7015-02中The system working site collect treat-need material with Main Material Collect Hopper GNXT7015-02， GNXT7015-03’s mining shaker ZKR-1230 within collected material and added water for dilution, it flow to mining shaker system GNXT7015-03’s mining shaker ZKR-1230， Materials pass through separation of shale shaker, the solids exit the tank and liquid pass through shale shaker screen and flow into the tank. The Submersible Slurry Pump GN100YZ100A-30 that is on Mining shaker tank system GNXT7015-03’s pipe feed the liquid to shale shaker tank system GNXT7015-01’s shale shaker GNZS5594E-LDF， The Solids filter though shale shaker and exit outside of the tank, the liquid filter through shale shaker screen enter the sinking sand compartment, then shale shaker tank system GNXT7015-01’s Submersible Slurry Pump GN100YZ100A-30 feed into GNZJ594E-D8N Disilter， Liquid after treatment flow to Shale Shaker Tank System GNXT7015-01’s mud removal tank, the liquid pass through pump and exit the system.  The solids exit from disilter and pass through disilter shaker and solids exit the This system also equip with biding system that allow operator depends on site operation situation for chemical-add purpose.  GN Solids America LLC as manufacture of these machineries offer transparent pricing policy and offer full after service capacity as just like other US manufactures.   For other solids control machinery,  GN Solids America LLC offer various  model of shale shaker with multiple layers of screens panel. This combo unit is functioning as both primary shale shaker and desander unit in one. 

Facts:

Poor boy degasser’s design purpose is for treating big volume of dissolved gas in the drilling mud. Such gas under the pressure will be expand if not take care it properly.  The poor boy degasser in traditional throttle pipe and between the vibrating screen and it has a direct discharge of gas pipeline. The installation of poor boy degasser is  typically installed in the rear of the throttle manifold.

The poor boy degasser needs meet the following operation needs:

• Through field operation feedback, the capacity of gas process on poor boy degasser need to be five time as much as the design cycle.
• The inner diameter of the pipeline need to be same or larger than the coke manifold in the inlet pipeline of the poor boy degasser.
• The drilling fluid is directly discharged into the inlet manifold of the vibrating screen or the reserve tank of the drilling fluid.
• The diameter of the exhaust should be 8 inches or greater.
• The valve should not be installed on the gas discharge line.

Poor boy degasser parameters:

• The gas from the separator must be firmly fixed.
• During the cold weather the poor boy degasser installed on the bottom of the cleaning valve, in order to prevent liquid from blocking the liquid gas separator, the valve should be opened.
• It need to be clean and maintain the poor boy degasser according to the specification or service provided by the manufacture

GN Solids America LLC is user-friendly driven manufacture.  We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries .

Houston office and warehouse address:

6710 Windfern Rd

Houston, Texas 77040

USA

We are looking forward to assist your drilling project need

The choice making of use mud cleaner that contain desanders, desilters and shale shaker is concern of operation cost and the space allowed for the machinery.  It serves the purpose to remove the needed-remove solids in the drilling mud to keep the mud in high performance as needed. It is placed after shale shaker and vacuum degasser filtering the mud after initial filtering large solids and removes the gas that contain in the mud.

Turn the motor on and start pay attention on the rotation direction of the motor.  The motor need to be rotated in opposite directions and need to be marked on the motor direction after the confirmation of the check.  The operator at this stage need to pay attention on the sound that is from the machinery and if unusual sounds appear it needs turn off the machine and check the motors and tightness of the screens.

Operator need to perform routine check of motor bearing, the seals and lubrication of every moving part and fill the oils if necessary.  Such routine check need to perform after intense use of machinery to prevent structural damage that will most likely put the cleaning mud operation in stop.

To keep costs of operation in consist, shaker screen need to be flushed to clean the surface.  In some case of high viscosity of cleaning drilling mud, it also need to check the damage of the mesh as well after the flushing it with water.

Operator need to stop the feeding of the sand pump and let the shale shaker idle for period of times, rinse with water and timely clean the surface of the screen then stop the shale shaker motor.

Like the shaker screen, hydrocyclone is another replacement parts that need the cleaning like the screen after each shift of use.  This check to see if large objects are causing jamming that leads to shorted the use life of hydrocyclone.

The 18th China International Petroleum & Petrochemical Technology and Equipment Exhibition

Profile of exhibition

China International Petroleum & Petrochemical Technology and Equipment Exhibition (CIPPE) is an annual gathering of petroleum and petrochemical industry. With a magnificent exhibition space of around 90,000 square meter, 18 national pavilions, 1,800 exhibitors and over 110,000 professional visitors from 65 countries and regions.  CIPPE has become the largest petroleum exhibition in the world.

GN Solids Control LTD advantage is we are the solids control manufacture that made the whole  solids control machinery  our-self  plus we custom made the whole mud recycle system to meet specific project’s need for our customers.  Our customer are ensure we provide the solids control machinery to meet local environmental standard around the world and dealing with manufacture them self to ensure the best possible price to keep overall cost of rig operation as consist as possible.  We provide consist stocks of parts and tech personals ready at the request of customers by moment’s notice.  There are lots of manufactures in China who can make less-costly machinery and system but adding other facts for operation consideration, GN Solids Control LTD is the choice of obvious.

GN Solids Control LTD will exhibit at: New China International Exhibition Center, Beijing

• Date: March 27 – 29, 2018
• 88,Yuxiang Road,Tianzhu,Shunyi District,Beijing. Exhibition Hall E2, Booth E2168
• GN Solids Control LTD will exhibit replacement brands shale shaker screen, decanter centrifuge, complete mud system, shale shaker and various pumps.

GN Solids Control LTD manufacture full lines of solids control machineries and its replacement shale shaker screen for itself and major brands.  .  We offer full lines of shale shaker screens in composite frame that will be acid resist and last longer than steel frame screen  in house to become single supply source of drilling operation.

As a drilling fluids cleaning decanter centrifuge manufacturer in China, GN solids control keep improving the quality and design of our decanter centrifuge to meet the requirement for different clients and different applications. GN solids control brand is the top brand for solids control drilling fluids recovery, oil sludge treatment, oil recovery, drilling cuttings management. We can meet the different requirement for customized voltage and frequency, and explosion proof standard, like IEC EX, ATEX, CNEX for class 1 div 1.

We can produce 9 inch, 14 inch, 18 inch, 22 inch, 30 inch decanter centrifuge, VFD decanter centrifuge is suitable for drilling waste management system, because the drilling fluids conditions are changing all the time, you have to use different frequency to change the differential speed and pump flow rate to keep the centrifuge working smoothly.

GN solids control second new facility with high advanced workshop to produce decanter centrifuge and vertical cuttings dryer, we owns balancing machine for middle speed, high speed, big bowl centrifuge high speed for different size decanter centrifuge.

The CNC machines can produce centrifuge bowl components by ourselves, the bowl material is centrifugal casting by duplex stainless steel 2304, better than stainless steel 316L, 304. The screw conveyor is made of SS304, the impeller opening is help to improve the treating capacity effectively. The tungsten carbide tiles can protect the centrifuge impeller from danaged, and it is repairable while it is broken.

The bowl lifting bracket is to protect the bearing during road transportation and sea freight, which is the most important and expensive parts for the whole centrifuge.

The important important issue for the decanter centrifuge working life is the centrifuge bowl assy, welcome to visit GN solids control centrifuge workshop to watch the production process of our decanter centrifuge, the faclity is located in Beijing, about 30 km from Beijing Airport.