GN Nodig Mud Recycling System

The GND series is a mud recovery system designed for micro tunnels and piling. Recently at GN’s China headquarters, a complete mud recovery system has just been completed and shipped to domestic customers in China.

GN Solids Control is the world’s leading manufacturer of solids control equipment and mud recovery systems. As a leading manufacturer of shale shakers, mud cleaners, decanter centrifuges, cutting dryers, centrifugal pumps, etc., GN’s brands and products are available. More and more international customers are recognized.

The ND system consists of a two-layer mud shaker, two hydrocyclones, a centrifugal pump, a tank and an electrical control system. The system can effectively separate solids and liquids, reduce the solid waste content in the drilling mud, make the cuttings drier, easy to transport, environmentally friendly and easy to handle. The entire system is very compact and armored, very economical and value for money. The first stage separation of the system is a two-layer mud vibrating screen. When the mud enters the lower layer of the screen, large solids will be separated from the mud. Fine solids and mud will fall into the tank, and the mud will pass through the centrifuge. The pump draws in two hydrocyclones that work like a sand remover to separate the solids size to 40 microns. The solids separated by the hydrocyclone will fall onto the upper deck of the shale shaker and the solids will be further dried for disposal. The clean mud separated by the hydrocyclone will fly back to the tank and be pumped back to the wellbore for reuse and recycling. The basic configuration of the mud recovery system is a two-layer mud shaker, two hydrocyclones for sand removal, a centrifugal pump, a mud tank and some other components.  Visit our website at www.gnsolidsamerica.com for more information, please send your questions to USA@gnsolidscontrol.com.

From the beginning of 2015 to the present, the price of crude oil is like a roller coaster, falling sharply and then rising again and then falling. It is testing everyone’s heart durability. Recently, oil prices seem to be a bit more stable than before. West Texas Intermediate oil prices fluctuate between $45 and $50. Well, this seems to be better than the price dropped below $30 earlier this year. But it is still far below the price that oil companies can make. Everyone is struggling, no one is willing to give up, if we can’t make money, we need to do our best to find out how to save money. As a leader in the solids control business, GN Solids Control can help you save money and survive difficult times.

As an important part of the drilling system, the solid control system plays a vital role in the whole process. If properly managed, the solids control system can save you a lot of mud costs, consumables and equipment purchase costs. GN’s equipment comes from Shale shaker, desanders, desilters, mud cleaners, decanter centrifuges, mixers, centrifugal pumps, mud guns and various tanks, all of which are cost effective and value for money. There are several advantages to GN that can reduce equipment prices. GN has now implemented consumables such as large-scale manufacturing equipment and screens. This helps reduce procurement costs, reduce labor costs and increase efficiency. If the quantity is large, this will also reduce transportation costs. All GN equipment is armored and easy to transport, which will save a lot of money. The recent exchange rate of the US dollar against the Chinese yuan has increased, which will make equipment prices more competitive. GN’s new facility No. 2 has been put into operation, mainly for the manufacture of vibrating screens, which will improve GN’s manufacturing capabilities, good quality control and delivery time control. It will ultimately reduce costs and bring more benefits to customers. We will do our best to help your business succeed. Welcome to www.gnsolidsamerica.com and send your questions to USA@gnsolidscontrol.com

Solid control is very critical during the oil and gas drilling process, it will maintain the required property of the drilling mud and remove the low gravity solids from the liquid, and finally can make the drilling mud which could be reused and recycled in the drilling mud system. A good solid control process could increase the rate of penetration, reduce the wear and tear of the drilling equipment, such as the pistons, liners of the mud pump and allow for better hole cleaning.

The new composite framed shale shaker screens have the follow features: the steel frame part is welded automatically by robot with higher strength and better quality conformity. The injection molded plastic is mixed with imported fiberglass and it can resists high temperature up to 140 degree, and it’s tougher, more endurable and can work under higher vibration G force. . The heat press of the screens adopts the process of four side tensioning which can minimize the gap between the top and support screens and extend the life of the screens. GN’s shaker screens will be 3 layers with the API number above 60, while other screens manufacturer only use 3 layers until API number above 100. And GN’s mesh supplier is the same as DERRICK and MI SWACO’s. GN’s screen adopts the rectangular wire configuration and the wire is 50% more thicker than the square wire configuration, and it could be used up to 300-700 hours. GN’s composite screens cover GN’S OEM screen, MI SWACO MONGOOSE, BRANDT VENOM, BRANDT KING COBRA, FSI, etc. GN can also customize the screens according to customer’s requirement. All the composite screens are repairable. Comparing to steel framed screens, the non blank area of composite framed screen is 10-20% more. And the composite frame is not easily to get rusted and can be stored up to 5 years.

That’s the brief introduction about GN’s screen strategy. GN would like to hear from you. Welcome to visit www.gnsolidsamerica.com and please send your ideas to USA@gnsolidscontrol.com .

GN Solids Control is the world famous solid control equipment and mud recycling system manufacturer, As the leading manufacturer for shale shaker, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, etc, GN’s brand and products are recognized by more and more international customers. GND system is comprised of a double deck shale shaker, two hydrocyclones, one centrifugal pump, one storage tank and electrical control system. The system can effectively separate the solid and liquid and reduce the solid waste content in the drilling mud, and make the drilling cuttings drier, easy to transport, environmental friendly and easy for disposal. The whole system is very compact and skid mounted, is very economic and good value for money.

We have been trying to develop in different market for our Oil Sludge treatment system. Range from Waste Manager, drilling waste processing company, as well as the oil company and oil field service company. The system’s first level of separation is the double deck shale shaker, when the mud goes into the lower deck of screen, the large solids will be separated from the mud the fine solids and mud will be dropped into the tank, and the mud will be sucked by the centrifugal pump into the two hydrocyclones which is working like the desander which can separate the solid size up to 40 microns. The solid separated by the hydrocyclone will drop onto the upper deck of the shale shaker, then the solids will be dried further for disposal. The clean mud after the separation by the hydrocyclone will flew back the tank and be pumped back to the wellbore for reuse and recycling. The basic configuration of the mud recycling system is one double deck shale shaker, two hydrocyclones for desanding, one centrifugal pump, one mud tank and some other parts.

Welcome to visit our website www.gnsolidsamerica.com and get more information, please send your inquiries to USA@gnsolidscontrol.com .

 

GN Solids Control is a comprehensive company which specializes in manufacturing solid control equipment and system. Since its establishment in 2007, it always focused on the quality and reliability, and how to help the customers save more money. And among all the solid control equipment, there are 3 star products that have been proved to be more rugged, durable and reliable, they are: shale shaker, decanter centrifuge and cutting dryer.

Today I want to talk about one of our best seller—-363 decant centrifuges. Its bowl diameter is 360mm which equals to 14 inch, and it is one of the most popular sizes centrifuges used in Oil and Gas industry. More and more drilling companies started to outsource the mud cleaning services to mud service company, and centrifuge technology is the newest intervention. All the configuration is high standard which can meet most of the customer’s requirement. The bowl material is made of duplex SS 2205/ SS 2304, the screw conveyor material is made of SS 304/ SS 315 and then the surface is protected by the tungsten carbide tiles which is more endurable and reliable, and it can save customer’s money both in operation and maintenance. And the solid discharge port is also used the tungsten carbide inserts. The bearing is still used the world famous SKF. The FHD system is VISCOTHERM full hydraulic drive. The electrical control system is smart PLC control. And the coating is used the Cosco & Kansai Zinc Rich Epoxy Coating. The equipment can be used in extreme high temperature environment with heavy mud situation. And the decanter is designed and assembled on a skid, which makes it easier to move and save time and cost for transportation.

That’s the brief introduction about GN’s new fully hydraulic drive decanter centrifuge. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com