GN Nodig Mud Recycling System

GN Solids Control is one of the largest solids control and waste management companies specializing in the production of related equipment such as shale shakers, desanders, desilters, mud cleaners, vacuum degassers, mud gas separators, sedimentation centrifuges Machine, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun, etc. After 10 years of development, GN has promoted its products to more than 60 countries and now has two overseas subsidiaries in the US and Russia.

The oil sludge treatment system recently produced by GN Soilds Control is used in Kazakhstan for the convenience of the overall transportation of the oily sludge treatment system. The on-site installation and the formal operation have been highly recognized by the customers in Kazakhstan, and have been debugged by the after-sales service personnel of GN Soilds Control. In the case of feedback on the use of field equipment, the effect of the oily sludge treatment system has exceeded the original design expectations. Kazakhstan customers are highly appreciative.

The high oil content of the on-site waste of Kazakhstan customers cannot be directly used or effluxed, and it is piled up to be air-dried or buried underground. It not only pollutes the environment, but also causes a lot of waste of resources. The local environmental protection department lists oily sludge as dangerous solid waste. The company’s oily sludge treatment system not only improves the environment, but also recovers crude oil and achieves considerable economic benefits. The oily sludge treatment system produced by GN Soilds Control mainly consists of sludge vacuum pump, tank body, dosing system, heating mixing tank, buffer oil water separation tank, vibrating screen, horizontal screw centrifuge, three-phase disc machine, screw pump, PE. The tank, the receiving box and the like, the oil sludge first enters the heating and stirring tank and simultaneously adds the flocculating agent, and is separated by the vibrating and sieving, the horizontal screw centrifuge is solid-liquid separation, and the three-phase disc machine separates the oil, water and mud. The solid phase oil content after treatment is controlled at ≤ 2% to meet customer’s processing requirements.

Welcome to www.gnsolidsamerica.com and send your questions to USA@gnsolidscontrol.com

The low-temperature solid-state control equipment recently produced by GN Solids Control is sold to Uzbekistan for use in the severe cold area. The low-temperature solid-state control equipment used in the Uzbekistan site is required to meet the ambient temperature of -50C degrees Celsius. After our technicians, business managers and customers The communication provider finally ordered our low temperature solid control equipment.

The low-temperature solid-control equipment produced by Guanneng can produce a variety of models according to the actual application volume of the on-site customers. The low-temperature solid-control equipment produced by our company has high-efficiency separation ability on site, and the solid control equipment produced by GN Solids Control is widely used. In oil drilling, coalbed methane development, horizontal wells, non-excavation directional drilling rigs, pile drivers, shield mud recovery and other fields.

The low temperature solid control equipment ordered by the customer mainly includes drilling fluid centrifuge, drilling fluid vibrating screen, drilling fluid slurry cleaner and drilling fluid vacuum deaerator. The drilling fluid centrifuge is designed for the characteristics of petroleum drilling fluid. Special equipment for solid-liquid separation can complete various processes such as feeding, centrifugal sedimentation and unloading at full speed. The drilling fluid vibrating screen box is made of stainless steel. The motor has high vibration intensity, large screening area, adjustable screen box angle, enhanced shock absorption measures and low working noise. It is the most important first-level solid-control separation equipment in drilling operations. The drilling fluid mud cleaner cyclone adopts pure polyurethane material, the sieve box is made of stainless steel, and the motor and electric control are all internationally famous explosion-proof brands. The drilling fluid vacuum degasser is a solid control device for treating gas infiltrating drilling fluids, which can quickly remove various gases intruding into the drilling fluid, and plays an important role in restoring the specific gravity of the mud and stabilizing the performance of the mud.

Welcome to www.gnsolidsamerica.com and send your questions to USA@gnsolidscontrol.com

GN Solids Control is a leading manufacturer of solids control equipment and systems. The company started its first business in 2007, and our main goal has always been quality and reliability, which helps our customers save money and variable time. Of the total equipment we offer, three main products have proven to be stronger, durable and reliable: mud shakers, decanter centrifuges and cutting dryers. Solid control is very critical during the oil and gas drilling process, it will maintain the required property of the drilling mud and remove the low gravity solids from the liquid, and finally can make the drilling mud which could be reused and recycled in the drilling mud system. A good solid control process could increase the rate of penetration, reduce the wear and tear of the drilling equipment, such as the pistons, liners of the mud pump and allow for better hole cleaning.

Centrifugal pumps are known to have high efficiency and low power consumption. This combination is critical in commercial buildings, for example, many centrifugal pumps can be used. Known for its durability and low maintenance due to its simple design Centrifugal pumps are used in buildings to pump general water supplies as boosters and household water supplies. The centrifugal pump is designed to pump sewage and mud. They are also used in fire protection systems as well as heating and cooling applications. In addition, they are very popular in the beverage, dairy, food and light chemical industries.

GNSB series centrifugal pumps are used to transport mud or mud or water. It can be used as a desander, a feed pump for desilters, or as a mixing pump for Jet Mud mixers. It can also be used as a stroke pump as well as a booster pump for drilling mud pumps. All GN centrifugal pumps are machined with tungsten carbide mechanical seals and well-known brand bearings. And spare parts are interchangeable with most international brand pumps to help customers easily access spare parts. The open impeller design reduces axial thrust loads and makes installation, maintenance and maintenance easier.

This is a brief introduction to GN’s new hydraulically driven decanter centrifuge. Welcome to www.gnsolidsamerica.com, please send your questions to cris.zhang@gnsolidscontrol.com

The GND series is a mud recovery system designed for micro tunnels and piling. Recently at GN’s China headquarters, a complete mud recovery system has just been completed and shipped to domestic customers in China.

GN Solids Control is the world’s leading manufacturer of solids control equipment and mud recovery systems. As a leading manufacturer of shale shakers, mud cleaners, decanter centrifuges, cutting dryers, centrifugal pumps, etc., GN’s brands and products are available. More and more international customers are recognized. The GND system consists of a two-layer mud shaker, two hydrocyclones, a centrifugal pump, a tank and an electrical control system. The system can effectively separate solids and liquids, reduce the solid waste content in the drilling mud, make the cuttings drier, easy to transport, environmentally friendly and easy to handle. The entire system is very compact and armored, very economical and value for money.

The first stage separation of the system is a two-layer mud vibrating screen. When the mud enters the lower layer of the screen, large solids will be separated from the mud. Fine solids and mud will fall into the tank, and the mud will pass through the centrifuge. The pump draws in two hydrocyclones that work like a sand remover to separate the solids size to 40 microns. The solids separated by the hydrocyclone will fall onto the upper deck of the shale shaker and the solids will be further dried for disposal. The clean mud separated by the hydrocyclone will fly back to the tank and be pumped back to the wellbore for reuse and recycling. The basic configuration of the mud recovery system is a two-layer mud shaker, two hydrocyclones for sand removal, a centrifugal pump, a mud tank and some other components.

Visit our website at www.gnsolidsamerica.com for more information, please send your questions to USA@gnsolidscontrol.com.

GN Solids Control is one of the largest solids control and waste management companies specializing in the production of related equipment such as shale shakers, desanders, desilters, mud cleaners, vacuum degassers, mud gas separators, sedimentation centrifuges Machine, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun, etc. After 10 years of development, GN has promoted its products to more than 60 countries and now has two overseas subsidiaries in the US and Russia.

Recently, we forced our key staff to push our Decant centrifuges to the North American market. So far, we have received a lot of good feedback from different end users in the US and Canada. Our decanter centrifuge system is suitable for many different environments. They can work in a super hot desert environment. The VFD control system is provided by SIEMENS or ABB. All bearings used in the centrifuge are made of SFK quality bearings to ensure longer life and more reliable operation. All motors and control panels are explosion-proof and certified for use in Zone 1 and Zone 2 hazardous areas. The 553 decanter centrifuge will be a star product for handling large volumes of liquid and solids separation work. More and more customers are showing great interest in this. Also for many different industries, they also chose our decanter centrifuge as the first choice for solids separation. Now GN can not only manufacture the traditional 363 centrifuge with a 14-inch bowl, but also make a larger bowl size GNLW553 with a bowl size of 22 inches. The equipment can be used to process water-based mud, oil-based mud systems, dewatering and recovery of barite. This device also has some great features: it is VFD controlled and offers operators a variety of solutions to adapt to changing field operations.

This is a basic introduction to the large bowl type decanter centrifuge 553. I hope it will be useful to you. We will do our best to help your business succeed. Welcome to www.gnsolidsamerica.com and send your questions to USA@gnsolidscontrol.com