GN sludge vacuum pump for Philippines HYM Oil sludge transfer project

  1. Philippines HYM Oil sludge transfer project introduction

Slop oil treatment design capacity requirement:5-8 m³per hour.in put parameters:Oil:50%,Water: 40%,Solid: 4% by w/w.

Purpose of this project: first stage: exhibition and presentation to potential clients and end user2.Next stage, for pilot sample testing and fesibility verification.

Features and Benefits

1.1 Air Operated to run manually or automatically. Eliminate the danger of electricity.

1.2 Dual Function: Capable for Suction and discharge

1.3 Suitable for clean-up jobs of liquid or mixture of liquid and solids as well as the powder solids.

1.4 Mobile wheels design for easy movement.

1.5 Save manpower, one person is enough to do the clean-up jobs efficiently.

1.6 Optional of different type of suction tools for different conditions.

GN recommended sludge vacuum pump model is GNSP-10B.

2.1Brief introduction

Sludge vacuum pump, also named as solids transfer pump. It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging.Most of the solids, sludge and liquid could be transferred by using this pump. With special structure design of no rotating parts in the cavity, it can be used at tough environmental with high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max.up to 80%. It has following features: the high efficiency venturi device can produce vacuum up to 25 inch HG(Mercury Column). This is equivalent to vacuum of 85Kpa to suck the material. The pump structure is simple and compact, almost none of wear parts. The transfer distance is up to 500-1000 meters.

2.2 Advantages of GN sludge vacuum pump.

Air operation, no need electric power, suitable for hazardous area application.

Powerful self-suction with long transfer distance. Suction distance up to 50 meters, discharge distance up to 500-1000meters.

Widely application for transferring liquid, wet sludge and solids.

Transferred solids size Maximum50 mm or 75 mm, sludge solids content up to 80%.

Compact structure for easy to move.

None of rotating parts inside the cavity, less wearing for long lifetime.

Automatically and continuously working is available with easy operation and maintenance.