Hebei GN Solids Control is an expert in solids control and mud recycling system. Beside design and manufacturing solids control system for oil and gas drilling with four stage treating equipment, GN solids control also designs, manufactures and supplies mud system for HDD drilling normally with two stage treating equipment:shale shaker and desander or desilter or mud cleaner. Not only HDD drilling companies, but also the HDD rigs supplies are targeted customers for they will pack a whole set of mud recycling system for their rigs. This year, GN made 2 sets of mud recycling system for Vermeer HDD rigs. One is 500gpm, the other is 350gpm.
The included equipment in the 500gpm mud system is listed as below：
One set of GNZS703E-DZ line motion shale shaker;GN shale shaker adopts stainless steel for the bottom deck. One set of GNZJ703E-8N desilter with 8 pieces of 4’’ cyclones and bottoe shale shaker. One set of 50hp centrifugal pump to feed the desilter. One set of 50hp mixing pump with Venturi Hopper mounted on the 40ft mud tank. And one set of 40ft container size mud tank. Firstly, the waste mud falls on the shale shaker, and then the liquids from the shale shaker will be pumped into the desilter for further process. Also, mixing device is installed to add additives on the clean mud.
Besides 350 gpm and 500 gpm mud system, GN has developed a complete line of mud system matched to different HDD drilling rigs and different drilling depth. GNMS-150 GPM, GNMS-350 GPM, GNMS-500 GPM, GNMS -800 GPM, GNMS 1000 GPM, GNMS 1500 GPM. GNMS 2000 GPM. With this whole line of mud recycling system, GN could meets various drilling depth and different rigs.