Author: gnadmin

All mud agitators and mud conditioners share the same simple design and rugged components. With minimal replacement parts, they provide years of dependable, economical service. Smaller solids that may bypass the agitators can be removed by Brandt hydrocyclones. Brandt mud conditioners save valuable fluid by drying the hydrocyclone underflow with efficient linear motion.

Gnsolidsamerica.com mud agitator are ideal for“closed-loop” operations or whenever excessive liquid loss from hydrocyclone underflows must be avoided. When liquid loss is not a concern, the hydrocyclone underflow may be directed away from the screens by simply opening the bypass valve. This minimizes liquid pools and reduces undue weight on screens.

The causes of damage of mud agitator are: 1. The drilling fluid density, high viscosity, mixer, low power, overload use 2. Don’t insist on continuous operation, drilling fluid static for a long time after the start, by overload 3. Can’t adhere to timely maintenance moist 4. Installation is unreasonable, no cover or fan operation 5. Fixed condition is bad, screw loosening, or a fixed screw is not complete, large vibration and damage, these can cause damage to the blender. Mud agitator in order to adapt to the need of more comprehensive drilling, it is the trend of future: timing, constant speed, single, such as choosing a variety of functions, easy operation, stable starting torque, rotational speed, low noise, etc. GN solids control company staff to build professional e-commerce website, here, we will show you the best mud mixers, as well as our online services platform to answer your problem. If you want to get it, click here to go directly to the page, I believe your choice, can’t be wrong.

 Drilling operation, especially the environmental impact of drilling waste become workers, service companies and regulators are issues of concern. Early regulations are generally refer to factors such as underground water and the local environment, to limit emissions or hydride in oil content in the content, or place limits on emissions. Used for drilling fluid types also have detailed provisions, the toxicity of the need for evaluation of drilling fluid and drilling waste  mangement  and control. The new regulations to build and cost inevitably have an effect.

At present, the selection of drilling  waste  mangement  or the processing of drilling waste management  and emissions to meet the requirements of the new law is likely to increase. People are paying more attention to the waste generated by quantity, reduce its sources become a key factor in waste disposal. The SPE online library retrieval results show that as early as the early 1990 s began to appear the literature of drilling waste management. It shows that industrial focus on problems and abide by the laws and regulations and increased costs and increased at that time

 

GN drilling  waste  mangement is really a The far east dependent dirt program producer concentrate on drilling dirt recycling where possible program within 3 devissions: Gas and oil Drilling, Horizontally Directional Drilling(HDD)/Coal Seam Methan(CSM) as well as Slurry splitting up. GN offers joined Sydney marketplace within this past year as well as product sales as well as support gets strongger as well as stornger depending on high quality, resonable cost as well as certain support. Make sure you contact  with GN Solids Manage readily

Water well drilling normally is drilling 200-2000m depth and don’t need very high confirguration for mud recycling system. Depending on drilling conditions, clients choose different equipments to makes different confirguration to meet drilling application

Shale Shaker For First Phase Cleaning

1. Shale shaker cleaning 200-400micron drilling cuttings
2. Shaker deck is the most important mechanical parts for a shale shaker.
3. Shaker screen size and G force  is the main technical points for shaker
4. Vibrator motor gives G force to shaker
5. Deck angle adjust to make good angle to adjust cuttings dryness

Shaker Screen

1. Wedge type shaker screen for fast replace
2. Flat or Pyramid shaker screen dependong on drilling conditions
3. Shaker screen area and effecitive area is important to shaker performance

Big bowl decanter centrifuge normally working on oil feild for drilling waste management with big volume capacity. Big bowl and high speed will make it much harder to build as it needs very strict technical support.

Benifits Of GN Decanter Centrifuge

1.  Patent design with the highest configuration and best material for long and reliable service.
2. Bowl cylindrical and conical section made from duplex stainless steel 2205 by centrifugal casting.
3. Other parts of the bowl assembly material: stainless steel SS3016L
4. Screw flow distribution port  and bowl solids discharge port protected by tungsten carbide alloy
5. Scree protection:tungsten carbide tiles for longer life and easier replacement.
6. Easily adjustable liquid discharge weir height for flexible application
7. Bolw assemble supported by tighten belt for protection of bearing in moving
8. Genuine SKF bearing for longer and reliable operation.

Please contact GN Solids for more inquiry

Desanding plant is designed for piling rig which is belong to city foundation drilling. According to Australia piling industry, GN designed piling desanding plant for Australia accordling.

Piling Desanding Plant Technical Request

1. Need very compact design to minimum footpring

2. Don’t need separate very fine solids particals

3. Contains big stones or solids particals then oil drilling mud

4) Request fast moving and easy transport

5) No need for mud mixing

What Equipments Piling Desanding Planit Need?

1. Shale shaker with seive type shaker screen to separate big stones and larger solids particals.

2. 10-15" desander cones to separate sand and silimar solids particals

3. Compant mud tank to mud storage

4. Pump to transfer piling mud

GN has Australia branch also. Please visit GN Australia Web