Author: gnadmin

GN is a top
manufacture of solids control equipment in the world. It could manufacture
various solids control equipment and packaged mud system.

In this article,
we will give a brief introduction about the packaged mud system.

Usually, 1
complete set of mud system should include the following equipment, such as the
Shale Shaker, Desilter, Desander, Centrifuge, Centrifuge Pumps, Agitators, Mud
Guns, Mud tanks and some other necessary components.

For the mud
systems that manufactured by GN, they are widely not only used in the oil &
gas drilling industry, but HDD industry, coal bed methane drilling, water well
drilling, geothermal well drilling, mining, piling works, tunnel construction,
dredging construction. Sometimes they are also used for treating the industrial
wastewater and executing the solid-liquid separation.

As the mud
system are widely used in different industries and different industries have
different requirements, so there are always little or big differences between
different requirement that used in different industries, such as,

1.Usually the
packaged mud system used in the oil & gas drilling industry is very big,
there are many different solids control equipment installed like shale shakers,
mud cleaners, vacuum degasser, centrifugal pumps, jet mud mixer, agitators, mud
guns. There are many mud tanks for different functions, some tanks will be used
as storage tanks, some tanks will be used as mixing tanks, some tanks will
service for the solids control equipment.

2. The packaged
mud system is small, such as used in the HDD industry and CBM drilling
industry. The system structure will be compact and easily moved and the tank
quantity could be limited and tank volume could be small.

3. GN could
manufacture the customized mud system according to the customer requirements,
such as the specific onsite situation, the condition of drilling fluids, the
desired treatment effect of drilling fluids.

Finally, if you
want to learn more about GN Solids Control, welcome to visit GN’s website
and contact us.

Web：http://www.gnsolidsamerica.com  

Email：usa@gnsolidscontrol.com

In this article,
we will mainly introduce the Submersible Slurry Pump manufactured by GN Solids
Control.                                  

As what showed in
below picture, GN Solids Control manufactures and provides the Submersible
Slurry Pump from 4Kw to 45Kw and the Pump Flow is from 30m³/h to 270m³/h,
basically which could meet the requirements of most situations in drilling
field.

1. The Functions
of GN YZ series Submersible Slurry Pump;

In drilling field
the Submersible Slurry Pump is mostly used for feeding the Decanter Centrifuge
and feeding the mud to Shale Shaker from mud pit, sometimes it is also used for
feeding the Desander & Desilter.

2. The Features and
Advantages of GN YZ series Submersible Slurry Pump

1). The
cantilevered structure design, single-stage and single-suction pump;

2). Semi-open
impeller, there is the agitating vane designed located in the pump inlet with
the impeller;

3). Enough
stiffness with the pump shaft, there is no bearings and shaft seals between the
pump body and pump shaft that under the supporting seat, which ensure the pump
is available for transferring the fluid with high concentration solid particles
and there is no need to worry the bearings and shaft seals are damaged by the
solid particles in the drilling fluids. And the pump is maintenance-free and
high temperature resistant;

4). The standard
submersible length of the pump is 1.3 meters, customized length is also available;

5). The pump body
is made of wear resistant alloy and ensure the pump has a longer servicing
life;

6). Motor-driven,
a vertical motor is installed on its supporting seat and connected with the
pump by coupling;

7). There are
different Explosion Standards with the motors & electrical control panel,
such as EXdⅡBt4, IECEX, ATEX
that could meet different customer options;

Finally, if you
want to learn more about GN’s Submersible Slurry Pump, welcome to visit GN’s website
and contact us. http://www.gnsolids.com/

One
year would seem very short if you also have something to do and put in place
your days full. It is very just like yesterday when GN attended CIPPE 2015 via
Beijing, it comes the new yr and the new CIPPE Acrylic Show, CIPPE 2016.

Exactly what did GN show intended for CIPPE 2015?
1 . At the start of Year 2015, GN developed a compact drilling cuttings waste
materials management system, a combination of GNCD930C vertical cuttings dryer
along with GNLW363CG-VFD
decanter centrifuge, between your two equipment is a tank for receiving the
drilling water from the vertical cuttings dryer and for feeding the centrifuge.
It is a compact design, also suitable for land transportation without having
taking down the centrifuge along with V-G dryer.

2 . GN whole family of decanter centrifuges. For the most popular model
GNLW363CG-VFD you could check on the
waste management system skid, different centrifuges, GNLW223 of in search
of inch bowl, GNLW452 regarding 18 inch bowl however middle speed, GNLW553 of
twenty-two inch bowl.
3. Principal equipment for solids control systems, like shale shaker, mud cleaner and and
so forth

During CIPPE 2015, many purchasers and potential clients visited GN Solids
Control’s booth along with checked GN’s products, a few of them visited GN’s
factory having seen GN’s booth and they gifted good comments on GN’s producing
capability.What GN will show in CIPPE 2016?

Looking back to the past yr, GN has accomplished various achievements:
1 . all principal equipments was improved and also updated models are within
design, coming soon for CIPPE 2016.
2 . new machines and systems are well analyzed to be useful on jobsites, will
be introduced to clients inside near future.
3. GN’s completely new factory will be put into use in addition to new
workshops are below construction.

What to know more specifics? Come to us at address listed below:
Address: New China Intercontinental Exhibition Center, Beijing; Number 88,
Yuxiang Road, Tianzhu, Shunyi District, Beijing
Occasion Time: March 29-31, 2016
GN Booth No .: LOUNGE E2 -E2200, booth place 272m2.
Booth Location: http://public.cippe.com.cn/static/hall/2016bj/hall_e2.jpg
Appointment Email: sales@gnsolidscontrol. com
GN Factory Location: 40KM to the Exhibition Center (40 Minutes Drive)

In this article,
we will continue to introduce the key features with GN’s decanter centrifuge.

•  Easily adjustable fluid outlet on the drum;

Sometimes
in order to change the drying degree of solids or clarity of liquid, the size
of fluid outlet on the drum needs to be changed by customer.

With
GN’s centrifuge, there are 6 fluid outlets at the big end of the drum and there
is a cover plate mounted on each outlet by bolts. It just needs to loosen the
bolts and angle the cover plate and the outlet size could be changed easily.

•  Feeding fluid from the big end of centrifuge; 

With
all GN’s centrifuges, the drilling fluid goes into the centrifuge from its big
end. Compared with feeding fluid from the small end of centrifuge, on some
extent it will improve the working efficiency by feeding fluid from the big end
of centrifuge.

• Parts from world-famous suppliers;

1.The
bearing is 1 of the most important parts for the centrifuge. With GN’s
centrifuge, all the bearings are world-famous brands like SKF (Switzerland
brand), NSK (Japan Brand), FAG (Germany Brand).

 2.
All the electrical components used in the electric cabinet are also from famous
brands like SCHNEIDER (France Brand), SIEMENS (Germany Brand), CHINT (China
Brand), ABB(Switzerland Brand).

For
example, for the inverter of GN’s variable speed centrifuge, it is from ABB
Group. 

By
adopting these high-quality parts, GN guarantees to provide the best centrifuge
with perfect work performance and longer life to all the customers from the
world. 

• Explosion-proof property;

1.
Exd Standard;

2.
Positive Pressure Type;

Both
the motors and electric cabinet with GN’s centrifuge get through the IEC and
ATEX certification and could meet the explosion-proof requirement in developed
countries.

• PLC intelligent control 

For
the electric cabinet of GN’s variable speed centrifuge, it has a graphic user
interface and is PLC intelligent control, which could achieve centrifuge’s
self-protection and guarantee its most effective work.

In this article, we will mainly introduce the key features about the
centrifuge manufactured by GN. 

• Full Range of Centrifuge

1. From minimum 40GPM to maximum 484 GPM, GN’s Centrifuge could meet
the treatment capacity requirements in different industries. Like oil & gas
drilling industry, HDD & CBM industry, water well & geothermal well
drilling, industrial waste water treatment, etc. 

2. Besides, fixed speed & variable speed, standard configuration
& high configuration are also available and provide different options for
the customer.

• High-class raw
  material and manufacturing process

1. Drum                               

1).As 1 of the core parts of centrifuge, some company adopts the
manufacturing process of sand casting or solid-solution treatment. But the drum
of GN’s centrifuge is made from S304 or duplex 2205 stainless steel by
centrifugal casting, which could guarantee the drum rotates steadily at a
higher speed and gets a longer life. 

2).The solids
discharge ports on the drum and the fluid ports on the helical pusher are
protected by special ceramic insert.

2. Helical Pusher

1).The helical
pusher of GN’s centrifuge is S304 or S316 stainless steel. By special
solid-solution treatment over 1000℃, the helical
pusher get a higher strength and longer life. 

2).Besides, as the
helical pusher is used for pushing the solids continuously when working, the
wear of the pusher will be serious if no protection. There are special Tungsten Carbide tiles or Ceramic Tiles fixed around the
edge of pusher for protection. The tiles have long life and are easily for replacement. 

• Compact Structure

1). Usually, there are
2 motors (primary motor and secondary motor) equipped with each centrifuge. Compared with the
centrifuge made by some company, GN’s centrifuge has a much more compact structure,
as the 2 motors are installed at the same end of centrifuge, which also gets a
bigger space and facility the maintenance.

2).Besides,
the secondary motor connects directly with the gear differential so that the
belts are also left out.