Facts:

Poor boy degasser’s design purpose is for treating big volume of dissolved gas in the drilling mud. Such gas under the pressure will be expand if not take care it properly.  The poor boy degasser in traditional throttle pipe and between the vibrating screen and it has a direct discharge of gas pipeline. The installation of poor boy degasser is  typically installed in the rear of the throttle manifold.

The poor boy degasser needs meet the following operation needs:

• Through field operation feedback, the capacity of gas process on poor boy degasser need to be five time as much as the design cycle.
• The inner diameter of the pipeline need to be same or larger than the coke manifold in the inlet pipeline of the poor boy degasser.
• The drilling fluid is directly discharged into the inlet manifold of the vibrating screen or the reserve tank of the drilling fluid.
• The diameter of the exhaust should be 8 inches or greater.
• The valve should not be installed on the gas discharge line.

Poor boy degasser parameters:

• The gas from the separator must be firmly fixed.
• During the cold weather the poor boy degasser installed on the bottom of the cleaning valve, in order to prevent liquid from blocking the liquid gas separator, the valve should be opened.
• It need to be clean and maintain the poor boy degasser according to the specification or service provided by the manufacture

GN Solids America LLC is user-friendly driven manufacture.  We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries .

Houston office and warehouse address:

6710 Windfern Rd

Houston, Texas 77040

USA

We are looking forward to assist your drilling project need

The choice making of use mud cleaner that contain desanders, desilters and shale shaker is concern of operation cost and the space allowed for the machinery.  It serves the purpose to remove the needed-remove solids in the drilling mud to keep the mud in high performance as needed. It is placed after shale shaker and vacuum degasser filtering the mud after initial filtering large solids and removes the gas that contain in the mud.

Turn the motor on and start pay attention on the rotation direction of the motor.  The motor need to be rotated in opposite directions and need to be marked on the motor direction after the confirmation of the check.  The operator at this stage need to pay attention on the sound that is from the machinery and if unusual sounds appear it needs turn off the machine and check the motors and tightness of the screens.

Operator need to perform routine check of motor bearing, the seals and lubrication of every moving part and fill the oils if necessary.  Such routine check need to perform after intense use of machinery to prevent structural damage that will most likely put the cleaning mud operation in stop.

To keep costs of operation in consist, shaker screen need to be flushed to clean the surface.  In some case of high viscosity of cleaning drilling mud, it also need to check the damage of the mesh as well after the flushing it with water.

Operator need to stop the feeding of the sand pump and let the shale shaker idle for period of times, rinse with water and timely clean the surface of the screen then stop the shale shaker motor.

Like the shaker screen, hydrocyclone is another replacement parts that need the cleaning like the screen after each shift of use.  This check to see if large objects are causing jamming that leads to shorted the use life of hydrocyclone.

The 18th China International Petroleum & Petrochemical Technology and Equipment Exhibition

Profile of exhibition

China International Petroleum & Petrochemical Technology and Equipment Exhibition (CIPPE) is an annual gathering of petroleum and petrochemical industry. With a magnificent exhibition space of around 90,000 square meter, 18 national pavilions, 1,800 exhibitors and over 110,000 professional visitors from 65 countries and regions.  CIPPE has become the largest petroleum exhibition in the world.

GN Solids Control LTD advantage is we are the solids control manufacture that made the whole  solids control machinery  our-self  plus we custom made the whole mud recycle system to meet specific project’s need for our customers.  Our customer are ensure we provide the solids control machinery to meet local environmental standard around the world and dealing with manufacture them self to ensure the best possible price to keep overall cost of rig operation as consist as possible.  We provide consist stocks of parts and tech personals ready at the request of customers by moment’s notice.  There are lots of manufactures in China who can make less-costly machinery and system but adding other facts for operation consideration, GN Solids Control LTD is the choice of obvious.

GN Solids Control LTD will exhibit at: New China International Exhibition Center, Beijing

• Date: March 27 – 29, 2018
• 88,Yuxiang Road,Tianzhu,Shunyi District,Beijing. Exhibition Hall E2, Booth E2168
• GN Solids Control LTD will exhibit replacement brands shale shaker screen, decanter centrifuge, complete mud system, shale shaker and various pumps.

GN Solids Control LTD manufacture full lines of solids control machineries and its replacement shale shaker screen for itself and major brands.  .  We offer full lines of shale shaker screens in composite frame that will be acid resist and last longer than steel frame screen  in house to become single supply source of drilling operation.

As a drilling fluids cleaning decanter centrifuge manufacturer in China, GN solids control keep improving the quality and design of our decanter centrifuge to meet the requirement for different clients and different applications. GN solids control brand is the top brand for solids control drilling fluids recovery, oil sludge treatment, oil recovery, drilling cuttings management. We can meet the different requirement for customized voltage and frequency, and explosion proof standard, like IEC EX, ATEX, CNEX for class 1 div 1.

We can produce 9 inch, 14 inch, 18 inch, 22 inch, 30 inch decanter centrifuge, VFD decanter centrifuge is suitable for drilling waste management system, because the drilling fluids conditions are changing all the time, you have to use different frequency to change the differential speed and pump flow rate to keep the centrifuge working smoothly.

GN solids control second new facility with high advanced workshop to produce decanter centrifuge and vertical cuttings dryer, we owns balancing machine for middle speed, high speed, big bowl centrifuge high speed for different size decanter centrifuge.

The CNC machines can produce centrifuge bowl components by ourselves, the bowl material is centrifugal casting by duplex stainless steel 2304, better than stainless steel 316L, 304. The screw conveyor is made of SS304, the impeller opening is help to improve the treating capacity effectively. The tungsten carbide tiles can protect the centrifuge impeller from danaged, and it is repairable while it is broken.

The bowl lifting bracket is to protect the bearing during road transportation and sea freight, which is the most important and expensive parts for the whole centrifuge.

The important important issue for the decanter centrifuge working life is the centrifuge bowl assy, welcome to visit GN solids control centrifuge workshop to watch the production process of our decanter centrifuge, the faclity is located in Beijing, about 30 km from Beijing Airport.

As a top manufacture of Solids Control Equipment, GN Solids
Control has been constantly expanding its business & influence in global
market.

As 1 of the core products of GN Solids Control, the Decanter
Centrifuge is one of the most popular products for global customers. As we all
know, the decanter centrifuge is usually for separating the very fine solids
particles from slurry or mud at high speed, which is widely used in the
drilling field, industrial application, etc. But duo to its complexity and high
requirement for the manufacture process, especially for the high speed decanter
centrifuge, to some extent it belongs to a high-tech product and was under
control by companies from America, Switzerland, etc.

 

Since GN Solids Control was established in 2007, GN Solids
Control has focused on researching & manufacturing the high-speed decanter
centrifuge. By through the constant research and improvement, because of its
high quality and competitive price, the high-speed Decanter Centrifuge manufactured
by GN Solids Control got approved by more and more global customers.

 

In March 2015, GN Solids Control developed the strategic
cooperation with 1 of the customers from Algeria, who purchase more than 30
units of decanter centrifuge at one time. Here below are the pictures,

A few days ago, the feedback was gotten from this customer
and they gave a high praise with the centrifuge performance. According to their
description, all these centrifuges are under operation now in different
districts and each work very well. They thought the products of GN Solids
Control are very good and worthy to be believed.

 

It is gratifying when the good feedback was received from
customer, as creating value by using our products is just our goal.

 

Finally, if you want to learn more about the mud system
manufactured by GN Solids Control, welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com  

Email：usa@gnsolidscontrol.com