Author: gnadmin

GN Oil Sludge Treatment System is to use chemical to wash the oil sludge with heat to temperature of 60-70 C degree. After washing the slurry is pumped to GN separation equipment to separate into oil, water and solids. The recycled water can be reused in the washing process, and the oil is clean enough to sell to the refinery company, the solids contain less than 2% oil which can be sent to biodegradation or thermal unit for final disposal if needed.

Main separation treatment equipment of the oil sludge treatment system is the three-phase decanter centrifuge GNLWS364-VFD. Its operation is based on the principle of sedimentation, that is, solid particles with specificliquid weight precipitate in a predetermined time. This principle can also be applied to two immiscible liquids with different specific gravity. When the material enters the high-speed rotating drum, the material rotates synchronously with the drum. Because of the different specific gravity, the centrifugal force is different. The solid particles with the larger specific gravity are subjected to the greatest centrifugal force, followed by the heavy phase liquid (such as water) and the light phase liquid (suchas oil). So the centrifugal force is becoming less from outside to inside according to the magnitude of centrifugal force. A concentric solid layer and two liquid layers are formed. Solids are pushed out by the screw conveyor, and liquids are removed from theirrespective nozzles. Therefore, the application of three-phase decanter centrifuge can not only separate the solid in the material, but also separate the two-phase liquid with different specific gravity in the material, that is, Solid-liquid-liquid separation can be achieved.

Oil sludge sample from customer

Happy New Year 2022! Everyone!

Congratulations! 2 sets of 1000GPM Drilling Mud Solids Control System from GN Solids Control are on the way to our Shanghai Customer.

As you can see from the picture that those Shale shakers, Mud Cleaners, Centrifugal Pumps, explosion-proof lamps, Mud Tank, they are all brand-new! Indeed, it is customized! You only need to fill a form, which is a questionnaire about the detail of material or waste you deal with and other relevant questions. Then, we will design a unique solids control system for you according to your requirements and situation. Notably, our system is comprehensive enough to give you a one-stop turn-key solution. So, what you need to do is just wait!

Here, what you cannot see are GN Jet Mud Mixers, Agitators, Mud Guns and GN Submersible Slurry Pump. For different situation, we will prepare different equipment for you.

As the leading manufacturer of solids control & Waste Management equipment, GN Solids Control has been working with many big brands: like Baroid, Baker Hughes, EMEC(Egyptian Mud Engineering and Chemicals Company), Akros(No.1 Drilling Fluids Company in Russia), SL Group(Top Argentina Solids Control Service Company), COSL(China Oilfield Services Limited), Greatwall Drilling Company, Gazprom from Russia, Eriell from Russia, Burgan Co. for well drilling from Kuwait, EDC(Egyptian Drilling Company), JOHN ENERGY from India and Drilling Technologies from Italy.

Our Mud Recycling system is widely used in many different fields: Trenchless HDD（Horizontal directional drilling） Project, Bored Pile Project, TBM(Tunnel Boring Machine) project, Diamond Drilling, Water Well Drilling, CBM(Coal Bed Methane) Drilling, Geothermal Well Drilling and so on. Besides, there are skid mounted, trailer mounted and hydraulic jackup mud tank for you to choose. If you are interested, please feel free to contact us: Hebei Guanneng Solids Control Co.,Ltd. Probably, we will tell you more interesting things.

Happy holidays to you and your loved ones! Wishing you a Happy New Year!

GN recently sold Oil Sludge Treatment system to China Customer. GN Solids Control is a globally famous Solids Control Brand. GN Solids America, LLC is the first USA based solids control company from China.GN Solids America maintains a 30,000 SF warehouse in Houston Texas. GN Solids America stocks lots of solids control equipment and shaker screen. With Houston Branch established in 2013. This location has a GN sales team and warehouse service can provide to our customer at North/South American ” High Quality” “Fast Delivery” “Competitive Price”. GN America is also the marketing and distribution center for Latin America Market. The Houston location makes it easier for South America customer to order GN drilling solids control equipment.

What equipment GN Solids America can provide with Oil Sludge Treatment?

• Shale Shaker for coarse solids separation
• Decanter Centrifuge for fine solids separation or water and oil separation.
• Polymer dosing system for better oil sludge demulsification
• Dewatering System for ultra-fine solids flocculation
• Oil Water separators for two-phase liquid separation.
• Thermal desorption unit for minimizing the oil on the solids down to 0.3%.

Oil sludge is a mixture consisting of oil, water, and solids. The treatment of oil sludge would recover much oil and water for reuse. Also, it is an ideal solution for the solid’s disposal. More oil and water recovered, more energy and resource could be saved. GN oil sludge treatment products mainly include decanter centrifuge, oil-water separators, and thermal desorption unit.

GN equipment sold worldwide such as the USA, Russian, United Arab Emirates, Africa, India, middle east. etc. Benefit gets GN Product is 1. global customer service support 2. good quality with affordable price 3. Built tough with strong durable materials usage longer lifetime 4. Great for North and South America customer, GN Solids America LLC has storage inventory in Houston Texas. This will help to reduce the shipping lead time.

GN Solids Control can design and manufacture different size of liquid mud plant according to customer demand. GN can design and build several types of tank, such as vertical tanks, rectangular tank, round tanks, etc. The Liquid mud plant is used to manipulate (mix, dilute, treat, adjust) various drilling fluids to be used in wells supported by this Supply Base. Normally it expanded drilling waste management (DWM) processing, typically in the form of centrifuges used to treat used mud that has been back-loaded to the supply base. OSV (offshore supply vessels) are used to transport any drilling or completion fluids to and from the LMP that cannot be mixed up or treated on location. The LMP is in place for one primary purpose is to Keeping good mud properties in the well-bore.

Tank Types for Liquid Mud Plant

Oil Based Mud Tank

Water-based Mud Tank

Base Oil Tank

Water Tank

Brine tank (Fiber Glass Tank or Coating protection)

Bulk Tank

Mud Mixing Tank

Equipment used for Liquid Mud Plant

Normally, a decanter centrifuge made by GN Solids Control will be used for solids control of the drilling mud. Sometimes, clients will require a shale shaker for coarse solids removal. The mud agitators are mounted on the mud storage or mixing tanks for agitation of the mud to prevent the silting of the solids in the fluids. Sometimes, GN mud guns will be needed for agitation especially for the Conner of the mud tank. The mud mixing and chemical adding are done by Mud mixing hoppers and centrifugal pumps. GN Solids Control manufactures the decanter centrifuge, shale shaker, mud agitator, mud gun, centrifugal pump and mud mixing hoppers for the liquid mud plant.

For more information, please contact GN sales representative at the Web: www.gnsolidsamerica.com/ www.gnsolidscontrol.com

Add: 6710 Windfern Rd, Houston, TX 77040

GN Solids Control is a globally famous Solids Control Brand. GN Solids America, LLC is the first USA based solids control company from China.GN Solids America maintains a 30,000 SF warehouse in Houston Texas. GN Solids America stocks lots of solids control equipment and shaker screen. With Houston Branch established in 2013. This location has a GN sales team and warehouse service can provide to our customer at North/South American ” High Quality” “Fast Delivery” “Competitive Price”. GN America is also the marketing and distribution center for Latin America Market. The Houston location makes it easier for South America customer to order GN drilling solids control equipment.

What equipment GN Solids America can provide with Oil Sludge Treatment?

• Shale Shaker for coarse solids separation
• Decanter Centrifuge for fine solids separation or water and oil separation.
• Polymer dosing system for better oil sludge demulsification
• Dewatering System for ultra-fine solids flocculation
• Oil Water separators for two-phase liquid separation.
• Thermal desorption unit for minimizing the oil on the solids down to 0.3%.

Oil sludge is a mixture consisting of oil, water, and solids. The treatment of oil sludge would recover much oil and water for reuse. Also, it is an ideal solution for the solid’s disposal. More oil and water recovered, more energy and resource could be saved. GN oil sludge treatment products mainly include decanter centrifuge, oil-water separators, and thermal desorption unit.

GN equipment sold worldwide such as the USA, Russian, United Arab Emirates, Africa, India, middle east. etc. Benefit gets GN Product is 1. global customer service support 2. good quality with affordable price 3. Built tough with strong durable materials usage longer lifetime 4. Great for North and South America customer, GN Solids America LLC has storage inventory in Houston Texas. This will help to reduce the shipping lead time.