In this article,
we will mainly introduce the Submersible Slurry Pump manufactured by GN Solids
Control.
As what showed in
below picture, GN Solids Control manufactures and provides the Submersible
Slurry Pump from 4Kw to 45Kw and the Pump Flow is from 30m³/h to 270m³/h,
basically which could meet the requirements of most situations in drilling
field.
1. The Functions
of GN YZ series Submersible Slurry Pump;
In drilling field
the Submersible Slurry Pump is mostly used for feeding the Decanter Centrifuge
and feeding the mud to Shale Shaker from mud pit, sometimes it is also used for
feeding the Desander & Desilter.
2. The Features and
Advantages of GN YZ series Submersible Slurry Pump
1). The
cantilevered structure design, single-stage and single-suction pump;
2). Semi-open
impeller, there is the agitating vane designed located in the pump inlet with
the impeller;
3). Enough
stiffness with the pump shaft, there is no bearings and shaft seals between the
pump body and pump shaft that under the supporting seat, which ensure the pump
is available for transferring the fluid with high concentration solid particles
and there is no need to worry the bearings and shaft seals are damaged by the
solid particles in the drilling fluids. And the pump is maintenance-free and
high temperature resistant;
4). The standard
submersible length of the pump is 1.3 meters, customized length is also available;
5). The pump body
is made of wear resistant alloy and ensure the pump has a longer servicing
life;
6). Motor-driven,
a vertical motor is installed on its supporting seat and connected with the
pump by coupling;
7). There are
different Explosion Standards with the motors & electrical control panel,
such as EXdⅡBt4, IECEX, ATEX
that could meet different customer options;
Finally, if you
want to learn more about GN’s Submersible Slurry Pump, welcome to visit GN’s website
and contact us. http://www.gnsolids.com/