Month: July 2016

Mud agitator is widely used in mud cleaning systems. It is utilized in the mud tank as well as on the vessel to avoid the actual particles from settling straight down. Mud agitator is composed of some sort of motor, a gearbox, the particular shaft and impellers. This can be a very small equipment for drilling field.
Normally, a drilling rig mud tank system should be equipment with a significant no . of agitators. The higher quality , of the tank sides, a lot more quality of the mud agitators.
Many clients do not how to choose the best mud agitators modes and know the different mud agitators from different brand and various design. The main difference is that, typically the gearbox type is different. You will find mainly 2 type of items motor for mud agitators: helical bevel type items motor and Worm and kit type.
The helical bevel type gear motoriswith 2-stage or 3-stage transmission period.
It is with foot-mounted, flange-mounted Mounting mode, short flange-mounted model, torque arm-mounted type.

Furthermore, the Output shaft ofthe helical bevel type accessory motoris solid shaft, ineffective shaft (with key, having shrink disc and with involute spline).
Features of Helical-Bevel Products box and motor regarding mud agitator
It is Large modular design of the helical bevel type gear electric motor.
The helical bevel variety gear motoris with High reloading support. It is with a secure transmitting and a low noise degree.
The helical bevel variety gear motor is with good performance sealing. It can be used for an array of industry application.
The helical bevel type gear generator is with a High efficiency. It will save power during operating.
The helical bevel style gear motoris low repair and it can reduce the cost of users.
Worm and gearmotor device agitators is one of the most popular kind mud agitator. The gear package is worm and gear kind for easy operation repairs and maintanance. The worm and gear package is utilize the gear in order to transmit the motor acceleration to the request RPM. It might be widely used.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

GN keeps research and develop the best technology to manufacture top quality shaker screens for our clients,

Welcome come to know more info from our sales team.

Drilling mud service contractors around the world are all use the rectangular drilling fluid circulating tank because the installation and migration performance of the system works very well. Meanwhile, no matter how good the mud agitator perform in ideal situation, the drilling fluid tank all have corners that mud agitator’s propellers cannot reach and stir. In order to resolve this issue, install the mud gun in the top of the tank to agitate the far corner of the mud tank.

GN Solids America LLC’s GNNJQ series Mud gun serve as supportive machinery to the mud agitator.  It comes with nozzle that either made fixed angle or 360 degree ration angles the positive spray-effect distance of mug gun is approx. 3 meters long.   The gun size is related with drilling fluid density, viscosity and nozzle spray speed.  Mud gun is installed the top of mud tank can be need adjusted as need at any time. A mud gun is connected to a motor-pump to stir the drilling mud and prevent the solids from sinking on the bottom of the mud tank. The mud is mixed by being suck- withdraw into a pipe by a powerful pump and inject  back into the mud tank by being pressured push through the nozzle of the mud gun. The process is similar to how jets spray in the dish washer.

 

Drilling mud is a wet mud like substance resembles like thick clay and is used to keep the drill head in controlled-temperature and carry the remnants of drilling cutting to the surface in water and oil or gas drilling operations. The mud is recycled and reused by passing it through several steps of filter and cleaning by screens of the shale shaker or mud cleaner and decanter centrifuge as it is circulated into the mud tanks then back to the drill well on the drilling rig. In order to keep the mud as liquid-liked as possible, a mud gun and mud agitator is used to keep the tank agitated and mixed.  Drilling mud is made by mixing water or oil with a clay-like substance and also other chemicals.

 

After several years working, have seen a lot of positive feedback of GN products. Some bad ones, too. This is the first time, without a notice, found some press release of raising GN products, not that surprised, but this is a special one. They are trying to use internet help us to be known by more people. While as we all know, known by people with reputation, is the key to improving business, we here thanks all the clients whol helped us on this.

http://www.gomcmag.com/editorial/2016/05/no_slacking_allowed

“If they start pumping at 800 gpm and you have liquids (drilling mud) coming over instead of just solids, you’re going to have issues,” says Reyes, a manager at CGE Services and Solutions in Bakersfield, California. “Those drilling fluids cost money, and our customers want to retain and reuse as much of them as possible.

Like all other clients, or everyone all over the world, the fist intension is to save money. Well really saving money do not means cheap nothing, and put it to the drilling site. So all of them care about the performance, what is actually saving is the one works well or even better than the expensive ones.

Reyes says the company bought its first GN Solids shale shaker more than one year ago. At the time, the main allure was the competitive price. But Reyes quickly discovered the machine also lived up to its performance specifications, which explains why CGE now owns 10 GN units — or nearly half its fleet of shale shakers, he notes.

Professional users, professional service companies, is the ones who is dealing / handling the solids control euqipment, though a lot of drilling compnies have their own team working on this. If you take it as a indepnent comapny, it is quite same. Then we will see, the different operating way, we get quite different result, saving more money sometimes. Especially when people have discriminations on original manufacturing place. Some clients told us in a joking way, when we operate a products from US / EU, when something goes wrong, people will think, what is wrong with my work, did I do something wrong, and they may check manual. While if it is from China, or somewhere eles, the first thing they will do is kick the equipment, and shout what is this shit doing! Hope this will change soon, and expecting GN keep doing good and in this good products team.

If you are interested in this blog, freely to email me asking for some feedback from clients. A lot of big players are telling the world, GN products is even better than similar EU / US products.